479
Conguring Port Forwarding
1. Access the Gateway/Router’s setup page by entering its LAN-side IP address in the address eld of your web
browser. (192.168.0.1, in this example.) The Gateway/Router setup page should appear. You may need to enter an
administrator username and password in order to access the setup page.
2. Click on the link which opens the Port Forwarding setup page. This page is located within the “Advanced” ->
“Port Forwarding” page.
3. Once you have opened the Gateway/Router’s Port Forwarding setup page, you should see a number of data elds,
such as “IP address”, “Local Port” or “Public port”, etc.
Here you will enter the port numbers you want to be forwarded, and the IP addresses of your network devices
which you want those messages forwarded to. In this example:
Network Camera 1
IP address: 192.168.0.10
Local Port: 6001 (used to access the camera’s integrated web server)
Public Port: 6001
Network Camera 2
IP address: 192.168.0.20
Local Port: 6002 (used to access the camera’s integrated web server)
Public Port: 6002
4. Click “Apply” to save your Port Forwarding settings.
5. Test your settings.
To access the Local network device remotely, enter your Gateway/Router’s static IP address followed by the port
number of the device. In this example, by entering: http://111.222.123.1:6001 in a web browser, you would see
the top page of Network Camera 1.
