27 |
6.1 The first usage of the EM7180
1. Once the EM7180 has completed booting, a wizard appears.
2. Choose you language at ‘Menu Language’ and press the ‘OK’ button.
3. At ‘Time’, you can set the current time. You can select the ‘Time Zone’, or you
can setup the time manually at ‘Manual’.
4. At ‘Wired Lan Setup’, network settings can be made. If a DHCP server is
available in your network, select ‘DHCP IP (Auto)’ and press the ‘OK’ button to
receive an IP-Address from the DHCP server. Select ‘Fix IP (Manual)’ and press
the ‘OK’ button if there is no DHCP server active or in case you want to setup the
IP-settings manually. If the manual option is chosen, please make sure the IP-
Address data is in range with the current network.
6.2 Formatting the hard disk
1. Go to ‘Setup’.
2. Go to ‘System ‘and press the ‘OK’ button.
3. Go to ‘HDD format’ and press the ‘OK’ button.
4. Select ‘HDD1’ and press the ‘OK’ button.
5. Follow the instructions shown on screen to format the hard disk.
6.3 Video settings
1. Go to ‘Setup’.
2. Select ‘Video’ and press the ‘OK’ button.
3. Select the ‘Aspect Ratio’. Choose 16:9 if you are using a wide-screen television.
4. Go to ‘Video System’ and press the ‘OK’ button.
5. By default, HDMI auto is selected. But, if you want, you can select the resolution
you want. For example: Choose ‘1080P 60Hz’ if you are using a Full HD
television. Press the ‘OK’ button.
6. Go to ‘SD Video System’ and select the region. PAL is commonly used in the
main part of Europe, NTSC is commonly used in North-America and Japan.
Press the ‘OK’ button.
7. Go to ‘1080P 24HZ’. Select ‘ON’ if you have video material which contains the
original specifications of 24 frames per seconds. This will usually result in
smother playback of this specific video contents. Press the ‘OK’ button.
8. The other video options are usually satisfying by default, and therefore will not be
explained in detail.
9. Press the ‘Return’ button.
6.4 Sound settings
1. Select ‘Audio’ and press the ‘OK’ button.
2. ‘Night Mode’ is set to ‘Off’ by default. This can be switched to ‘On’. This is ideal
when the EM7180 will be used during night time. This setting makes the overall
sound experience a bit softer.
