741485
9
Verklein
Vergroot
Pagina terug
1/20
Pagina verder
(((ELKRON)))
MP110 USER MANUAL
(((ELKRON)))
MP110 USER MANUAL
4.Sensor EXCLUDED/Re-entry
1. Enter the Master user code and press the
E
key.
2. The first sensor available for EXCLUDED is proposed. The message
“INSULATION Z nn” appears on the display (where nn refers to the
number of the sensor, see the sensor table to know to which zone it
corresponds).
3. Use the
1
key to forward scroll the list of sensors..
Use the
2
key to backward scroll the list of sensors.
Use the
TOTAL
key to return to the beginning of list.
4. To EXCLUDED the sensor under consideration, press
E
.
The message “ZONE nn INSULAT” appears on the keypad screen.
If all the sensors are EXCLUDED, the message “ALL ZONES
INSULAT will appear on the LCD display.
5. Press
EXIT
F
to exit the programming function.
1. Enter the Master user code and press the
O
key.
2. Re-entry of the first EXCLUDED sensor is proposed with the message
“SETTING ZONE nn” (where nn is the number of sensor, refer to the
sensor table to know to which zone it corresponds).
3. Use the
1
key to forward scroll the list of EXCLUDED sensors.
Use the
2
key to backward scroll the list of EXCLUDED sensors.
Use the
TOTAL
key to return to the beginning of the list.
4. To include the zone under examination, press
O
5. The message “ZONE nn SETTED” will appear on the keypad screen.
To select the next zone, press the
1
or
2
key. The message
“ALL ZONES SETTED” will appear on the display if there are no
EXCLUDED zones.
6. Press
EXIT
F
to exit the programming function.
4.1 Sensor EXCLUDED
4.2
Re-entry of Previously EXCLUDED Sensors
9
2.
Electronic Key Programming
SYSTEM MANAGEMENT WITH
ELECTRONIC KEY
DK2000M
1.Commutator Description
ON = alarms stored, low battery,
absence of mains, system
failures, tampering
SLOW FLASHING =
during key programming and to
signal open inputs. In case of
concomitance of stored alarms,
failure, etc. with open inputs, the
led flashing will be fast.
ON = ZONE 1 ARMED
OFF = ZONE 1 DISARMED
ON = ZONE 2 ARMED
OFF = ZONE 2 DISARMED
ON = ZONE 3 ARMED
OFF = ZONE 3 DISARMED
Once your system has been installed, if management by electronic key
is foreseen, the unit must acquire the keys that you intend to use. We
recommend performing the first storage in the presence of the engineer.
Keys can be stored in three different ways:
- STORAGE OF A NEW KEY
For storing a key code in a new system or changing the code of all
keys in case one key is lost
- ADDING A KEY
For adding one or more keys to an existing system
KEY CODE DUPLICATION
For storing a key code in a second system by copying it from a
previously programmed key. With this function it is possible to check
one or more systems with a single key. For example, the home system
and the office system will both recognize the same key (without
needing to use 2 different keys).
CHECK OF STORED KEYS
For checking previously programmed keys, by verifying correctness
of code, the key number and the zones controlled.
32
9

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Elkron MP110TG bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Elkron MP110TG in de taal/talen: Engels als bijlage per email.

De handleiding is 0,44 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Elkron MP110TG

Elkron MP110TG Gebruiksaanwijzing - Deutsch - 32 pagina's

Elkron MP110TG Gebruiksaanwijzing - Français - 120 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info