their safety or they have received instructions
from such a person in how to use the equipment
safely. Children must always be supervised in
order to ensure that they do not play with the
equipment.
ƽ CAUTION
Read all the safety regulations and instructions.
Any errors made in following the safety regulations
and instructions may result in an electric shock, fire
and/or serious injury.
Keep all safety information and instructions in a
safe place for future use.
2. Layout (Fig. 1)
1. Catch for CEE coupling cover
2. Reset device for the overheating guard
3. Heat output switch
4. Thermostat control
5. Overheating guard sensor
6. Heater
7. Air outlet grille
8. Thermostat sensor
9. 400V / 16A CEE integrated connector
3. Items supplied
Open the packaging and take out the equipment
with care.
Remove the packaging material and any
packaging and/or transportation braces (if
available).
Check to see if all items are present.
Inspect the equipment and accessories for
transport damage.
If possible, keep the packaging until the end of
the guarantee period.
IMPORTANT
The equipment and packaging material are not
toys. Do not let children play with plastic bags,
foils or small parts.
There is a danger of swallowing or suffocating!
Original operating instructions
Electric heater
4. Intended use
The equipment can be used in enclosed rooms in a
free standing position for room heating. Keep the
front of the housing at least 1.5 m and all other
housing surface areas at least 60 cm from walls and
combustible materials (furniture, curtains, etc.).
The equipment may only be used completely
assembled and standing on the floor. It is prohibited
to operate the equipment on an instable surface (e.g.
on a bed).
The equipment may only be used for its intended
purpose. Any other use is deemed to be a case of
misuse. The user/operator and not the manufacturer
will be liable for any damage or injuries of any kind
caused as a result of this.
Please note that our equipment has not been
designed for use in commercial, trade or industrial
applications.
Our warranty will be voided if the equipment is used
in commercial, trade or industrial businesses or for
equivalent purposes.
5. Technical data
Rated voltage: 400 V 3~ 50 Hz
Heat output: 5000 W (2500 W / 5000 W)
Thermostat control: Infinitely adjustable
Protection type: IP 24
6. Before starting the equipment
Important. Before using the equipment for the first
time, check that the voltage supply is the same as the
voltage details set out on the rating plate.
Read the safety regulations in section 1.
Check the correct air throughput by holding a
sheet of paper a distance of 10 cm in front of the
air outlet grille in air circulation mode (without
heating). The paper must be blown away from the
air outlet grille.
When the equipment is used for the first time or
after a long period of rest, it may emit an odor for
a short time. This is not a fault.
Because of the special heating system and a high
air delivery rate, the emitted air may be felt to be
cooler than that from a conventional fan heater.
This is not an equipment defect.
10
GB
