SETTING UP CLEANING AND CARE
DESCALE REGULARLY
TROUBLESHOOTING
USING YOUR BABY BOTTLE WARMER
STERILISING
MILK W
W
LID
RACK
POWER CORD
ELEMENT COVER
WATER BATH
CONTROL PANEL
BASE
FUNCTIONS
ICON FUNCTION DESCRIPTION
Milk W Evenly warms the milk to approximately 32-42°C. The perfect
temperature for your baby. Recommended setting for milk warming.
Fast
(20% quicker at 9oz)
Quickly and evenly heats larger volumes of milk to approximately
30-44°C. Perfect when you are in a rush with older babies. Caution;
bottle/jar will be hot if left in the Milk Bottle Warmer after the
program has nished. Caution: For Double Milk Warmer milk will be
too hot if bottles contain mixed levels of milk/food.
Defrosting Defrosts frozen milk or baby food.
Food W Heats food up to 60°C.
Sterilising Used to sterilise bottles, teats, and accessories*. Always thoroughly
wash items before sterilising. This function kills 99.9% of bacteria.
CONTROLS
ICON CONTROLS DESCRIPTION
Menu button Toggling between the 5 functions. The function selected will illuminate.
V Adjusts the volume (Fl. Oz.) of milk/food being heated. This must
be set each time a new function is selected. Cycle Time Indicator
will automatically change for the selected volume. Adjustable volume
ranges between 2oz (58ml) and 9oz (225ml).
Start/Stop/Standby
button
For switching between starting, stopping and entering standby mode.
To switch off unplug.
DISPLA
ICON CONTROLS DESCRIPTION
Cycle Time Indicator Indicates how long a cycle will take, once the cycle is started, this will
count down to zero in minutes.
V
Single Bottle W
Indicates the volume of milk/food to be heated. This volume
corresponds to the amount of milk in one bottle.
V
Double Bottle
W
If heating 2 bottles/containers, select the volume of one bottle. Both
bottles/containers must contain equal amounts. Risk of under heated
milk/food if more milk/food is in one of the containers.
POSSIBLE CAUSE(S) SOLUTION(S)
MY MILK/FOOD IS
You may have selected the
incorrect volume for the
milk/food being heated.
Ensure that the volume selected is the same as the volume of milk/food being
heated in one bottle/container.
Ensure you have selected the correct function.
If using the Double Milk warmer, ensure the volume in both bottles/jars is equal.
Your Bottle Warmer may need descaling. Always descale regularly, see Descale
Section for how to descale.
MY BO
Your Baby Bottle Warmer
is in standby mode.
Press the Start/Stop/Standby button to light up the Control Panel.
Heating cycle may have
been started before water
was added to the Water
Bath.
Allow to cool for half an hour and try again. Always ensure the correct amount of
water is in the Water Bath before starting a cycle.
FUNCTIONS
+MILK
W
+F
W DEFROSTING
++FOOD W
1g +1ml of water STERILISING
TIME
2 oz (56 ml) 5 min 5 min 5 min 12 min
30 min
3 oz (85ml) 6 min 6 min 10 min 13 min
4 oz (114ml) 8 min 6 min 15 min 20 min
5 oz (142ml) 9 min 8 min 19 min 23 min
6 oz (170ml) 9 min 8 min 20 min 24 min
7 oz (198ml) 10 min 9 min 20min 25 min
8 oz (227ml) 11 min 10 min 21 min 31 min
9 oz (225 ml) 12 min 10 min 22 min 32 min
*Bottles will be sterile for 24 hours after cycle as long as the lid isn’t removed.
The chart below shows the preprogramed times for each of the warming functions for the corresponding volumes of
milk/food being heated for both the Single and Double Bottle Warmer.
Read and follow these instructions before using your Baby Bottle Warmer.
This is an attended appliance. Do not leave unattended during use, unplug
after each use (risk of re if an unattended appliance is left operating).
Never remove the lid while the Baby Bottle Warmer is operating. (Function light is
illuminated). W
keep hands a
Before cleaning mak
Dualit recommends cleaning y
Do not submerge the Base, Power Cord or plug into water or other liquid, or position under a water tap.
Do not use sharp, abrasive or aggressive cleaning agents, bleach or scouring pads to clean the Baby Bottle Warmer.
The use of such cleaning implements may affect the life of the Baby Bottle Warmer.
IMPOR
CO
The Baby Bottle Warmer needs to be descaled regularly. As a minimum, it is recommended that you descale once
a month in soft water areas, every 21 days in medium water areas and every 14 days in hard water areas. You can
check your water hardness with your water provider. Wear rubber gloves. Do not use on marble surfaces. Do not put
descaler bottle on work surfaces. Wipe descaler bottle after use.
Tip -
build up in your Bab
W
Bottle
do not allow water to stand
in the Baby Bottle
ov
instead of tap water
Before the rst use or after a long period of no use, ll and operate the Baby Bottle Warmer empty on a Sterilising
function. Do not submerge the Base,
permanent damage to the a
W
Baby Always shake the bottle/stir the food to avoid hot spots. Check the temperature before
serving, failure to do so will result in a risk of scalding baby .
Always remove the bottle/jar from the Baby Bottle Warmer immediately at the end of the cycle to prevent the
food/milk from overheating. Risk of scalding . Caution:When using the Fast Milk Warming function always check
selected bottle volume before starting the cycle, to prevent the food/milk from overheating; risk of scalding . Bottle/
jar and Water Bath will be hot; risk of scalding. Always check milk and food temperature before giving to your baby.
Before sterilising, ensure all items have been cleaned with warm, soapy water to remove all milk/food residue.
Rinse thoroughly. Separate all items into individual components.
Note:
Always remove bottle/jar from the warmer as soon as the cycle has nished. Failure to do so will result in a risk of
scalding baby.
+ Always gently shake milk bottle to avoid hot spots and check the temperature every time by placing drops onto the
inside of your wrist before serving. Failure to do so will result in a risk of scalding the baby .
++ Always ensure milk/food is thoroughly heated. Stir any food halfway through the cycle to avoid hot spots. Test food
by placing a metal spoon to the bottom of the container, wait 5 seconds and withdraw the spoon, rest the spoon against
your lips. Caution:
DON’T FORGET
TO REGISTER
Y OUR PRODUCT
WW W. DU ALIT .COM/REGISTER
OR BY POST
1
1
1
1
1
4
4
4
7
7
10 10
1
2
2
2
2
2
5
5
5
8
8
11 12
2
Position the Baby Bottle Warmer
Base on a at dry surface away from
sources of heat, as close to the wall
socket as possible. Do not store
or use the Baby Bottle
under kitchen cabinets,
an appliance garage,
curtains or ammable material
as it will emit steam from the
steam vent in the Lid.
Do not cov
Place the milk bottle facing
downwards inside the Water Bath.
Remove the Lid and Rack, pouring
away any excess water.
Pour 100ml of just-boiled water
into the Water Bath, then add
50ml of Kilrock Espresso & Coffee
Machine Descaler. This can be
purchased on dualit.com. Caution:
Be awar
of scalding and chemical
inhalation.
Rinse the Water Bath a minimum of three
times. Failure to do so can cause
injury
with descaling solution in it.
Repeatedly press the Menu button
until the chosen icon illuminates
with a red ashing light.
Position the Lid on top of the Rack
and plug into mains. Caution:
Ensure that the lid is corr
positioned,
so may aff
performance.
Unplug from the mains when not
in use. Do not remove the items
from the Water Bath for at least 5
minutes due to residual heat.
When the function ends the Baby
Bottle Warmer will beep three
times. Caution: Pressing the Start/
Stop/Standby button will end the
heating cycle early and the milk/
food will not be heated to the
correct temperature.
Tip away water from the Water
Bath after each use and follow
cleaning instructions. Note: wait
15 minutes before starting the next
function cycle.
Fill the Water Bath with water. See
table below for amounts and t the
Rack and Lid.
Register your product at Dualit.
com this will only take 60 seconds;
you will need the product model
and serial numbers that are on
the rating label on the base of the
product.
Fill bottle/jar with desired amount of
food/milk. Note: Minimum bottle ll
2oz (56ml). Fit the bottle teat and lid.
W Remove lid from any food
jar before heating.
With the Lid and Rack removed, pour
water into the Water Bath. See table
below for amounts. Caution:Adding
too much water will slow the steam
sterilisation process, too little water will
result in unsterilised items and may affect
the life of the Baby Bottle Warmer.
Do not
Element Cov
Unplug the Baby Bottle Warmer from
the mains and allow to cool down
completely before cleaning.
Unplug the Baby Bottle Warmer from
the mains and allow to cool down
completely before descaling.
Pour away solution, wipe around
the surface with a cloth and rinse
well by pouring clean water into the
Water Bath.
Caution:
shock.When not in use, clean and dry the Baby Bottle Warmer and store in a cool, dry place.
Plug in the Baby Bottle Warmer to
the mains. The appliance will beep
to inform you that it is in standby
mode.
Place bottle collars, teats followed
by Lids on top.
The Baby Bottle Warmer will beep
3 times to indicate the cycle has
nished.
Items left within the Baby Bottle Warmer will remain sterile for up to 24hrs, providing the Lid is not removed.
Note: wait 15 minutes before starting the next function cycle.
Press the Start/Stop/Standby button
to start the cycle. Note: Never start
a function without water in the
Water Bath, this may affect the life
of the Baby Bottle Warmer.
Always check the temperature
before serving. Test milk by placing
drops onto the inside of your wrist.
Test food by placing a metal spoon
to the bottom of the container,
wait 5 seconds and withdraw the
spoon, rest the spoon against your
lip. Failure to do so will result in a
risk of scalding baby
Unplug Baby Bottle Warmer when
not in use.
Wash the Lid and Rack with warm,
soapy water and rinse thoroughly.
Clean all surfaces of the Base,
including inside the Water Bath
with washing up liquid and a soft,
damp cloth. Note: Do not use sharp,
abrasive or aggressive cleaning agents,
bleach, or scouring pads to clean the
Baby Bottle Warmer. The use of such
cleaning implements may affect the
life of the Baby Bottle Warmer.
3
3
3
3
3
6
6
9
9
3
Ensure that the Baby Bottle
Warmer is placed on a heat
resistant work surface. Do not
operate on a tray that can collect
water. Risk of electric shock.
Do not let the cord hang over the
edge of work surfaces or touch
hot surfaces.
Place bottle/jar into the Water Bath Teat facing up. Fill the Water Bath with
water, level with the milk/food in the bottle/jar and t the Lid. The Rack is not
required for heating milk/food.
Position the Rack over the bottles,
on top of the Base.
Clean all surfaces of the Base,
including the Water Bath, Rack and
Lid with mild detergent (washing up
liquid) and a soft, damp cloth.
Leave to stand for 20 minutes.
Repeatedly press the Volume
button to select the volume of milk/
food being warmed. The volume is
in Fl Oz. If using 2 bottles, select the
volume of 1 bottle/container.
Use the Menu button to
select Sterilising function.
Press the Start/Stop/Standby
button to begin the cycle.
Note: You do not need to
amend the volume for this cycle.
Once the Baby Bottle Warmer has
cooled down, remove the items,
pour away remaining water, and
follow cleaning instructions.
Immediately remove the bottle/
jar from the Baby Bottle Warmer
at the end of the cycle to prevent
overheating the food/milk. Caution:
During Fast Milk Warming function,
bottle/jar and Water Bath will be hot;
risk of scalding. Always check milk/
food temperature before giving to
your baby.
Repeatedly press the Menu button
until the Sterilising icon illuminates
with a red ashing light, then press
the Start/Stop/Standby button. The
icon light will turn solid. The cycle
will nish when the light turns off
and the beep sounds 3 times.
Single Bottle
W
Double Bottle
W
45ml of water 90ml of water
Single Bottle
W
Double Bottle
W
45ml of water 90ml of water
Single Bottle W Double Bottle W
120ml of water minimum 240ml of water minimum
T
REMO
T
KNOW YOUR BABY BOTTLE WARMER
Sterilisation
Sterilisation W Bath
Fill Lev
W
Double Bottle W
Only heat even amounts of milk/
food in each bottle/jar. Risk of
scalding if bottle/ jar contain
unev
