19
© 2004 directed electronics, inc.
z
Power Saver in Valet Mode: When the system enters Valet
Mode the LED illuminates steadily. If the vehicle is not used
(ignition is not turned on) for a period of one hour while the
system is in Valet Mode, the LED will shut off. If the system
remains in Valet Mode, the LED will come back on the next
time the ignition is turned on and then back off.
programming options
Programming options control what your system does during normal
operation, and require few or no additional parts. However, some may
require additional installation labor.
Following is a list of the program settings, with the factory settings in bold:
z
Active arming (only with the transmitter) or passive arming
(automatic arming 30-seconds after the last door is closed).
If programmed for passive arming, a feature called Smart
Relocking will occur when the system is disarmed without
opening a door, so that the doors will automatically lock
when the system passively rearms.
z
Arming/disarming confirmation siren chirps on or off.
z
Auto-Lock/Auto-Unlock on or off: With this feature on, the
doors will lock three seconds after the ignition is turned on,
and unlock when the ignition is turned off. If your installer is
programming the security system with the CliffNet
®
Wizard,
ignition lock and unlock are independent features and can
be programmed separately.
z
Passive door locking (with passive arming) or active door
locking (only when arming with the transmitter). Passive
