Handleiding Denon DVD2910 (pagina 25 van 42) (Nederlands, Duits, Engels, Frans, Italiaans)

30412

Verklein

Vergroot

Pagina terug

1/42

Pagina verder

ENGLISH

When Image Quality Adjustment 1 Is Selected

and Adjusted:

• Press cursor button (ª), then select the image

quality adjustment item with cursor buttons

(

0, 1), set the adjustment value with cursor

buttons (•, ª), and press the ENTER button.

• All of the adjusted contents will be stored.

CONTRAST (–6 to +6) (Factory default: 0)

• This adjusts the light/dark difference of the

image.

BRIGHTNESS (0 to +12) (Factory default: 0)

• This adjusts the brightness of the image.

SHARPNESS (MID) (–6 to +6) (Factory default: 0)

•This adjusts the sharpness of the image for

the intermediate frequencies.

SHARPNESS (HIGH) (–6 to +6) (Factory default: 0)

•This adjusts the sharpness of the image for

the high frequencies. (Only effective for

progressive images.)

HUE (–6 to +6) (Factory default: 0)

• This adjusts the balance between green and

red. (Not effective for progressive scan output

nor component output.)

CCS (0 to +3) (Factory default: 0)

• This performs removal of the color signal

component for images in which the color

signal component is mixed with the brightness

signal. (Only effective with progressive

images.)

MEMORY 1

00000

Remote control unit

When Image Quality Adjustment 2 Is Selected

and Adjusted:

WHITE LEVEL (–5 to +5) (Factory default: 0)

• This adjusts the white level.

CHROMA LEVEL (–6 to +6) (Factory default: 0)

• This adjusts the density of the color.

CHROMA DELAY (–2 to +2) (Factory default: 0)

• This adjusts the shift of the brightness signal

and the color signal of the image. (Only

effective for progressive images.)

(Adjustment between –1 and +1 is possible for

interlaced video.)

DNR (Digital Noise Reduction) (0 to +6) (Factory

default: 0)

• This reduces video noise.

MEMORY 1

000

Remote control unit

Select the memory using the 2 cursor buttons

(

0, 1) and press the ENTER button.

IMAGE QUALITY ADJUSTMENT 1

This permits adjustment of the contrast,

brightness, sharpness, tint, and enhancer.

/ Advance to Operation 3.

IMAGE QUALITY ADJUSTMENT 2

This permits adjustment of the setup level,

white level, color density, chroma delay, and

noise reduction. / Advance to Operation 4.

GAMMA CORRECTION

This is selected when dark portions of the

image are obscure, or bright portions are much

brighter than necessary.

/ Advance to Operation 5.

MEMORY 1

000

00 0

Remote control unit

When Gamma Correction is Selected and Adjusted:

Two kinds of display are prepared for adjustment of Gamma

Correction.

• When use the Numerical table of Gamma Correction. (Figure 1)

:Pressing the cursor button (ª)

• When use the Graph of Gamma Correction. (Figure 2)

:Pressing the enter button

MEMORY 1

24 32 48 80 96 128 160 19264

G0 G1 G2 G4 G5 G6 G7 G8

224

G9G3

Remote control unit

Select the adjust point with cursor buttons (0, 1), set the adjustment brightness level with cursor

buttons (•, ª), and press the ENTER button.

(If the PICTURE ADJUST button is pressed before pressing the enter button, an adjustment level is not

stored)

• The brightness level can be adjusted in range of 16 to 235.

•Pressing the cursor button (•) raises the level (and the image becomes brighter), and pressing the

cursor button (ª) lowers the level (and the image becomes darker).

•A press of the CLEAR button returns all of the setting points to the standard level.

✽ The level of the selected point cannot exceed the level of the points above and below that point.

(A dark portion cannot be set to exceed a portion that is brighter than it.)

MEMORY 1

100

235

GO : 0 24

(Figure 1) (Figure 2)

✽ Ending the Image Quality Adjustment

Press the PICTURE ADJUST button.

REFERENCE:

• In the Graph of Gamma Correction, the horizontal axis indicates the brightness level of the image that is

recorded on the disc, and the vertical axis indicates the brightness level of the image when it is output

from this unit.

MEMORY 1

100

235

GO : 0 24

MEMORY 1

100

235

GO : 0 24

• When bright points of the disc side are adjusted

to the “dark” of the output side, the fine parts

of the bright portion that normally become hard

to see, become an easily discerned image.

• When dark points of the disc side are adjusted

to the “bright” of the output side, the fine parts

of the dark portion that normally become hard

to see, become an easily discerned image.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

lees eerst de handleiding door;
controleer of uw vraag al eerder door iemand anders is gesteld;
probeer uw vraag zo duidelijk mogelijk te stellen;
heeft u een probleem en al geprobeerd om dit op te lossen, vermeld dit erbij aub;
heeft u een oplossing gekregen van een bezoeker dan horen wij dat graag in dit forum;
wilt u een reactie geven op een vraag of antwoord, gebruik dan niet dit formulier maar klik op de knop 'reageer op deze vraag';
uw vraag wordt direct op de website gezet; vermijd daarom persoonlijke gegevens in te vullen;

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Denon DVD2910 Handleiding

Hulp nodig? Stel uw vraag in het forum

Misbruik melden

Product:

Spelregels forum

Abonneren

Ontvang uw handleiding per email

Stel vragen via chat aan uw handleiding

Andere handleiding(en) van Denon DVD2910

Uw handleiding is per email verstuurd. Controleer uw email

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

U heeft geen emailadres opgegeven

Uw vraag is op deze pagina toegevoegd

Info