802927

Concept VP8370 Handleiding

19
Verklein
Vergroot
Pagina terug
1/47
Pagina verder
ENEN
3736 VP8370VP8370
29VP9181
EN
CLEANING AND REPLACING THE AIR OUTLET FILTER
1.Opentheairoutletgridintheappliance‘srearsection(Fig.5).
2. Removetheairoutletlter.Thistypeofvacuumcleanerisequippedwitha
H.E.P.A.lterintheoutlet,whichiscapableofcatchingevenverynedust
particles.Youcancleanthislterbytappingit,thenbrushingitwithasoft
brush.Afterthisoperationiscomplete,youmaycleanaverydirtylterby
washingandbrushingwithasoftbrushinlukewarmwaterwithnocleaning
agentsadded.Itisimportanttoletthewetpartsdrythoroughly.Awetlter
willbedamagedbyvacuuming!Donotuseahairdryertodryit!
Note: Wet cleaning may cause more wear and tear of the lter and,
consequently,mayshortenitsservicelife.
3. Insertthecleanedornewairoutletlterintotheapplianceandclosetheair
outletgrid.
TROUBLESHOOTING
Problem Cause Solution
Motordoesnotrun.
Pluginsertedintothemainsoutlet
incorrectlyorinsuciently. Checktheplugconnection.
Themainsoutletisnotlive. Checkforvoltage,e.g.byconnecting
anotherappliance.
Motorhasstopped
operating.
Improperorinsucientairow.Motor
overheatingfuseactivated.
Disconnect the cable from the socket.
Checkandreleasetheairsuction
anddischargeholes;checkthelter’s
cleanlinessand/orreplacethedustbag.
Letthevacuumcleanercooldown.
Frontcovercannotbe
closed Dustbaginsertedincorrectly. Checkthedustlterinstallation.
Reducedsuctionpower
Dustbagfullorclogged. Replacethedustbag.
Obstructedlter. Cleanorreplacethelter.
Cloggednozzle,tube,orhose. Checkandcleartheairpassageonthe
suctionanddischargesides.
Vacuumcleanerheats
up Slightheatingofthevacuumcleanerisnormalandcannotbeconsideredafailure.
OPTIONAL ACCESSORIES
The following appliance accessories can be purchased additionally:
SMS dust bags (5 units + 2 units of motor lters) Order code sms9000 Priced according to the valid price list
Fabric dust bag, 1 Ord. No. ts9180 Price according to the applicable price list
Motor lter Order code44290910 Price according to the valid price list
H.E.P.A. air outlet lter Order code 44290911 Priced according to the valid price list
(Fig.5)
29
VP8110, VP8111, VP8112
EN
(Fig. 5)
CLEANING AND REPLACING THE AIR OUTLET FILTER
1. Open the air outlet grid in the appliance‘s rear section (Fig. 5).
2. Remove the air outlet lter. You can clean this lter by tapping it, then brushing it
with a soft brush. After this operation is complete, you may clean a very dirty lter by
washing and brushing with a soft brush in lukewarm water with no cleaning agents
added. It is important to let the wet parts dry thoroughly. A wet lter will be dam-
aged by vacuuming! Do not use a hair dryer to dry it!
Note: Wet cleaning may cause more wear and tear of the lter and, consequently,
may shorten its service life.
3. Insert the cleaned or new air outlet lter into the appliance and close the air outlet
grid.
OPTIONAL ACCESSORIES
The following appliance accessories can be purchased additionally:
SMS dust bags (5 units + 2 units of motor lters) Order code sms9000 Priced according to the valid price list
Fabric dust bag, 1 Order code 44291711 Price according to the applicable price list
Motor ler Order code 44291704 Price according to the valid price list
28 VP9181
EN
CHECKING THE DUST COLLECTION BAG FILL
Whenthedustcollectionbagllindicatorturnsredduringoperation,replacethefulldustcollectionbagimmediately.
Ifthedustcollectionbagllindicatorisstillredafterthebaghasbeenreplaced,thismaybeduetoseveralcauses:
-someoftheairpassages(hoses,telescopictube,suctioninlet,brushadapter,orotheradapters)areobstructed;
-themotorlterisdirty;
-theairoutletlterisdirty.
Checkfor eachofthepossiblecausesaboveandeliminatetheproblembeforeyou startvacuuming.If thecauseofthe
problemcannotbeidentied,handover theproductto thenearestservicecentre.Neverusethevacuumcleanerifthe
baglevelindicatoriscompletelyredduringoperation.Themotorcouldbedamagedirreparably
CLEANING AND MAINTENANCE
You may clean the accessories and the appliance with a wet cloth. Never immerse
the appliance in water! Do not use any aggressive substances for cleaning, such as
solvents or abrasives!
REPLACING THE DUST COLLECTION BAG
1. Unplug the product from the mains. Disconnect the hose from the suction inlet
and open the appliance cover.
2. Push the ap on the dust retention bag holder; remove the used dust retention
bag (Fig. 3). Dispose of a paper or SMS dust collection bag. Be careful not to tear
the bag when handling. If the bag is made of fabric, empty it and close it
carefully - it can be used repeatedly.
3. Insert a new or empty dust retention bag by tting the plate in the bag holder. The
bag opening must be aligned with the hose hole in the appliance cover.
4. Never use the vacuum cleaner without the dust bag installed! If you forget to
insert the dust retention bag or you insert it incorrectly, the appliance‘s motor
may become damaged.
5. Close the cover. Press until you hear a click.
REPLACING FILTERS
• The lters should be cleaned or replaced when they are visibly dirty, or if the
appliance‘s suction power is reduced. Always check the lters after using the
appliance.
• In order to avoid damage to the appliance, do not use it with incorrectly installed
lters.
• Before replacing the lters, disconnect the appliance from the electrical socket.
• You can buy suitable types of lters from your dealer, or you can order them from
the manufacturer.
CLEANING AND REPLACEMENT OF THE MOTOR FILTER
1. Disconnect the exible hose and open the appliance cover.
2. Pull the dust collection bag out of its holder so that you can access the motor lter
more easily.
3. Remove the motor lter (Fig. 4). You can clean the lter by tapping it. If the lter is
heavily soiled, you may wash it in lukewarm water and let it dry properly.
4. Insert the cleaned or new motor lter into the appliance and close the cover.
(Fig.3)
(Fig.4)
28 VP8110, VP8111, VP8112
EN
(Fig. 3)
(Fig. 4)
37
EN
VP 8336
29VP9181
EN
CLEANING AND REPLACING THE AIR OUTLET FILTER
1. Open the air outlet grid in the appliance‘s rear section (Fig. 5).
2. Remove the air outlet lter. This type of vacuum cleaner is equipped with a
H.E.P.A. lter in the outlet, which is capable of catching even very ne dust
particles. You can clean this lter by tapping it, then brushing it with asoft
brush. After this operation is complete, you may clean avery dirty lter by
washing and brushing witha soft brush in lukewarm water with no cleaning
agents added. It is important to let the wet parts dry thoroughly. Awet lter
will be damaged by vacuuming! Do not use ahair dryer to dry it!
Note: Wet cleaning may cause more wear and tear of the lter and,
consequently, may shorten its service life.
3. Insert the cleaned or new air outlet lter into the appliance and close the air
outlet grid.
TROUBLESHOOTING
Problem Cause Solution
Motordoesnotrun.
Pluginsertedintothemainsoutlet
incorrectlyorinsuciently. Checktheplugconnection.
Themainsoutletisnotlive. Checkforvoltage,e.g. byconnecting
anotherappliance.
Motorhasstopped
operating.
Improperorinsucientairow.Motor
overheatingfuseactivated.
Disconnect the cable from the socket.
Checkandreleasetheairsuction
anddischargeholes;checkthelter’s
cleanlinessand/orreplacethedustbag.
Letthevacuumcleanercooldown.
Front covercannotbe
closed Dustbaginsertedincorrectly. Checkthedustlterinstallation.
Reducedsuctionpower
Dustbagfullorclogged. Replacethedustbag.
Obstructedlter. Cleanorreplacethelter.
Cloggednozzle,tube,orhose. Checkandcleartheairpassageonthe
suctionanddischargesides.
Vacuumcleanerheats
up Slightheatingofthevacuumcleanerisnormalandcannotbeconsideredafailure.
OPTIONAL ACCESSORIES
The following appliance accessories can be purchased additionally:
SMS dust bags (5 units +2units of motor lters) Order code sms9000 Priced according to the valid price list
Fabric dust bag, 1Ord. No. ts9180 Price according to the applicable price list
Motor lter Order code44290910 Price according to the valid price list
H.E.P.A. air outlet lter Order code 44290911 Priced according to the valid price list
(Fig.5)
29
VP8110, VP8111, VP8112
EN
(Fig. 5)
CLEANING AND REPLACING THE AIR OUTLET FILTER
1. Open the air outlet grid in the appliance‘s rear section (Fig. 5).
2. Remove the air outlet lter. You can clean this lter by tapping it, then brushing it
with a soft brush. After this operation is complete, you may clean a very dirty lter by
washing and brushing with a soft brush in lukewarm water with no cleaning agents
added. It is important to let the wet parts dry thoroughly. A wet lter will be dam-
aged by vacuuming! Do not use a hair dryer to dry it!
Note: Wet cleaning may cause more wear and tear of the lter and, consequently,
may shorten its service life.
3. Insert the cleaned or new air outlet lter into the appliance and close the air outlet
grid.
OPTIONAL ACCESSORIES
The following appliance accessories can be purchased additionally:
SMS dust bags (5 units + 2 units of motor lters) Order code sms9000 Priced according to the valid price list
Fabric dust bag, 1 Order code 44291711 Price according to the applicable price list
Motor ler Order code 44291704 Price according to the valid price list
28 VP9181
EN
CHECKING THE DUST COLLECTION BAG FILL
Whenthedustcollectionbagllindicatorturnsredduringoperation,replacethefulldustcollectionbagimmediately.
Ifthedustcollectionbagllindicatorisstillredafterthebaghasbeenreplaced,thismaybeduetoseveralcauses:
-someoftheairpassages(hoses,telescopictube,suctioninlet,brushadapter,orotheradapters)areobstructed;
-themotorlterisdirty;
-theairoutletlterisdirty.
Checkforeachofthepossiblecausesaboveandeliminatetheproblembeforeyoustartvacuuming.Ifthecauseofthe
problemcannotbeidentied,handovertheproducttothenearestservicecentre.Neverusethevacuumcleanerifthe
baglevelindicatoriscompletelyredduringoperation.Themotorcouldbedamagedirreparably
CLEANING AND MAINTENANCE
Youmaycleantheaccessoriesandtheappliancewithawetcloth.Neverimmerse
theapplianceinwater!Donotuseanyaggressivesubstancesforcleaning,suchas
solventsorabrasives!
REPLACING THE DUST COLLECTION BAG
1. Unplugtheproductfromthemains.Disconnectthehosefromthesuctioninlet
andopentheappliancecover.
2. Pushtheaponthedustretentionbagholder;removetheuseddustretention
bag(Fig.3).DisposeofapaperorSMSdustcollectionbag.Becarefulnottotear
the bag when handling. If the bag is made of fabric, empty it and close it
carefully - it can be used repeatedly.
3. Insertaneworemptydustretentionbagbyttingtheplateinthebagholder.The
bagopeningmustbealignedwiththehoseholeintheappliancecover.
4. Never use the vacuum cleaner without the dust bag installed! If you forget to
insert thedust retentionbagor youinsertit incorrectly,theappliance‘smotor
maybecomedamaged.
5. Closethecover.Pressuntilyouhearaclick.
REPLACING FILTERS
•The lters should be cleaned or replaced when they are visibly dirty, or if the
appliance‘s suction power is reduced. Always check the lters after using the
appliance.
•Inordertoavoiddamagetotheappliance,donotuseitwithincorrectlyinstalled
lters.
•Beforereplacingthelters,disconnecttheappliancefromtheelectricalsocket.
•Youcanbuysuitabletypesofltersfromyourdealer,oryoucanorderthemfrom
themanufacturer.
CLEANING AND REPLACEMENT OF THE MOTOR FILTER
1. Disconnecttheexiblehoseandopentheappliancecover.
2.Pullthedustcollectionbagoutofitsholdersothatyoucanaccessthemotorlter
moreeasily.
3. Removethemotorlter(Fig.4).Youcancleanthelterbytappingit.Ifthelteris
heavilysoiled,youmaywashitinlukewarmwaterandletitdryproperly.
4. Insertthecleanedornewmotorlterintotheapplianceandclosethecover.
(Fig.3)
(Fig.4)
28 VP8110, VP8111, VP8112
EN
(Fig. 3)
(Fig. 4)
36
EN
VP 8336
… 19 …

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Concept VP8370 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Concept VP8370 in de taal/talen: Duits, Engels, Frans, Italiaans, Spaans, Pools als bijlage per email.

De handleiding is 6.84 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info