Additional
Information
117
E
Refer to page 86.
Appears when you try to do
audio dubbing or AV insert on a
tape recorded in any mode other
than SP mode(p. 35).
Appears when you try to do
audio dubbing on a tape
recorded in 16-bit audio or 12-
bit 4-channnel mode (p. 87).
Appears when the camera
detects a blank section of a tape
during audio dubbing or AV
insert (p. 90).
Appears immediately after you
start recording, and the video
heads are badly contaminated.
Make sure to clean the video
heads when this caution appears
(p. 104).
Caution phrases
The camera displays various caution phrases —
they appear for 4 seconds before disappearing.
Appears each time you turn the
power on, until you set the time
zone, date and time (p. 30).
Refer to pages 12-13.
Refer to page 33.
Appears when the battery pack
is exhausted (p. 18, 97).
Appears when the tape has
reached the end.
Refer to page 21.
Appears when you press the 2
(record) button if the DV cable
is not connected properly
(p. 63).
Refer to page 105.
Appears as a warning to protect
the tape and also when
condensation is detected.
Remove the tape as soon as
possible after the camera has
displayed the caution.
Refer to page 86.
