615742
227
Verklein
Vergroot
Pagina terug
1/246
Pagina verder
227
Troubleshooting
Check the SD card
- You inserted a MultiMedia Card (MMC) or an SD card with a capacity of 64 MB or smaller into the camcorder. Use a
recommended SD card (A 38).
- Due to an SD card error, recording/playback Is not possible. Remove and then reinsert the SD card or use a different
SD card.
Cover is open
- The CF card slot cover or SD card slot cover was opened when the camcorder was switched to or turned on in
mode. Check that the recording media is correctly inserted and close the relevant card slot cover.
Data on CF A/CF B needs recovering Attempt to recover?
- If data on the CF card is corrupted, such as when the power suddenly turned off while recording, the data must be
recovered. When this message appears, select [OK] and then press SET.
Do not disconnect the USB cable or the power source until you safely end the connection from the computer.
- When the camcorder is in mode and is connected to the computer with the optional IFC-400PCU USB Cable,
the camcorder cannot be operated. Disconnecting the USB cable or power source while this message appears may
corrupt the recordings on the recording media in the camcorder. Use the computer’s Safely Remove Hardware
function to end the connection and disconnect the USB cable before using the camcorder.
Fan error
- The cooling fan may not be working properly. Consult a Canon Service Center.
File name error
- The folder and file numbers have reached their maximum value. Set [Other Functions]
> [File Numbering] to [Reset]
and delete all the MP4 clips (A 152) and photos (A 200) on the SD card or initialize it (A 41).
INFRARED switch position changed (ON/OFF). Check the focus.
- The focus may change when you turn the infrared mode on or off. Check that the focus is correct.
Invalid operation
- The following operations cannot be performed.
Adding a shot mark to an MXF clip that already has a shot mark or to an MXF clip in frame recording mode or
interval recording mode.
•Adding an $ mark to an MXF clip that already has an $ mark or adding a % mark to a clip that already has a %
mark.
In mode, immediately reviewing a recording made in a special recording mode.
Pressing the START/STOP button, or trying to start recording an MP4 clip, when there is no recording media in the
camcorder.
Management data is not supported and will be deleted
- This message may appear if you insert into the camcorder a CF card that was initialized by another Canon
professional camcorder. Check the contents of the CF card.
Management file error Cannot record
- Cannot record because the camcorder cannot write to the file control information. This may occur if the MXF files on
the CF card were accessed using another device. Save your MXF clips (A 166) and initialize the CF card (A 41).
May not be possible to record movies on this memory card
- You may not be able to record MP4 clips on an SD card without a Speed Class rating or rated CLASS 2 or 4. Replace
the SD card with one rated CLASS 6 or 10.
Media full
- The recording media is full. Delete some recordings (A 152, 200) to free some space or replace the recording media.
- CF card A or CF card B is full so recording will not start. Switch to the CF card in the other CF card slot to record.
Media is almost full
- The amount of available space on CF card A and CF card B combined is low. Replace the CF card that is not selected.
- The SD card is almost full. Delete some recordings (A 152, 200) to free some space or replace the SD card.
Media is not supported
- CF cards that are less than 512 MB or not UDMA-compatible cannot be used with the camcorder. Use a
recommended CF card (A 38).
Memory card is write-protected
- The LOCK switch on the SD card is set to prevent accidental erasure. Change the position of the LOCK switch.
No clips
- There are no clips on the recording media to play back. Clips must be recorded (A 47) in order to play them back.
No photos
- There are no photos on the SD card to play back. Photos must be taken (A 197) in order to view them.
COPY
227

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Canon XF200 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Canon XF200 in de taal/talen: Engels als bijlage per email.

De handleiding is 23,05 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Canon XF200

Canon XF200 Gebruiksaanwijzing - Nederlands - 248 pagina's

Canon XF200 Gebruiksaanwijzing - Deutsch - 264 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info