A - 13
APPENDIX
CONTEXT SAVE
CHANGE
DUPLEX JAM
CASSETTE1
MISSING
NETWORK OPTION
ERROR
PS OPTION
ERROR
PARALLEL
INTERFACE ERROR
ETHERNET
OPTION ERROR
TOKEN RING
OPTION ERROR
LOAD <SIZE>
IN <TRAY>
LOAD <size>
IN MANUAL
ing system. This message is displayed when
printer has been turned ON with context sav-
ing feature enabled, but due to manual
changes to the operation panel, there is not
enough memory to support the setup.
The user has pressed Go key to go on-line
after adjusting the context saving feature.
The printer is allocating enough memory for
the context saving feature.
A paper jam has occurred in the duplexing
unit.
The cassette is not in the printer or is not cor-
rectly positioned.
An incompatible network card has been
installed in the printer.
An optional ROM DIMM diagnostic error.
The parallel port is not communicating with
the controller.
The Ethernet card is not communicating with
the controller.
The Token Ring card is not communicating
with the controller.
Load the specified tray with paper size.
<paper source>
CASSETTE1: The 500-sheet internal cassette
CASSETTE2: The optional paper feeder
MPT: The multi-purpose tray
ENV.: the optional envelope feeder
ANY TRAY: Any tray that support Letter-,
Legal-, or A4-size paper.
<size>
LETTER: Letter size paper
LEGAL: Legal size paper
A4: A4 size paper
EXEC: Executive size paper
COM10: Commercial #10 envelope
MONARCH: Monarch envelope
DL: DL envelope
C5: C5 envelope
B5-JIS: B5-JIS envelope
B5-ISO: B5-ISO envelope
CUSTOM: Paper loaded from the MPT or
Manual Feed
Any: Unknown paper size
Load multi-purpose tray with the specified
paper.
Press Go key to enable the new
setting and resume operation.
Remove the jammed paper from
the paper path. The top cover
must be opened and closed to
resume printing.
Install the cassette in the printer.
Perform the troubleshooting pro-
cedure described in Section VI of
Chapter 4.
The specified paper source must
be loaded with the requested
paper size. To continue the print
job, you may have to press Go
key.
If the paper source runs out of
paper during printing, reloading
the paper source will allow the
printer to continue printing.
For manual feed, you need to
press Go key to continue printing.
Press the Go key to resume print-
ing.
Message
Meaning
Action