784867
26
Verklein
Vergroot
Pagina terug
1/40
Pagina verder
IN.XE ERROR CODES DESCRIPTION
Hr
An internal hardware error has been detected in the in.xe.
Contact dealer or service supplier.
AOH
Temperature inside the hot tub skirt is too high, causing the internal temperature in
the in.xe to increase above normal limits. Open skirt and wait until error clears.
Prr
A problem is detected with the temperature probe.
Call your dealer or service supplier.
HL
The system has shut the heater down because the temperature at the heater has
reached 119°F (48°C).
Do not enter the water! Remove the hot tub cover and allow the water to cool down, then
shut power off and power your hot tub up again to reset the system.
FLO
The system does not detect any water flow while the primary pump is running.
Check and open water valves. Check for water level.
Clean filter. If the problem persists, call your dealer or service supplier.
OH
The water temperature in the hot tub has reached 108°F (42°C).
Do not enter the water! Remove the hot tub cover and allow the water to cool down to a
lower temperature.
Call your dealer or service supplier if problem persists.
TROUBLESHOOTING SECTION
Should an error occur, the display will show one of the following error messages toggled with the clock and the water
temperature.
SMART WINTER
MODE
Our Smart Winter Mode pro-
tects your system from the cold
by turning pumps on several
times a day to prevent water
from freezing in pipes.
The “SWM” indicator lights
up when freezing is detected
and flashes when the purge
is active.
SETTING TEMPERA-
TURE UNIT
Water temperature can be
displayed in either Fahrenheit
(°F) or Celsius (°C). The display
will show F or C.
Use the Up or Down key to
change the setting. Use
the Light key to save all the
parameters.
USER INTERFACE  EASY 4
COOLDOWN
After heating the hot tub wa-
ter to the desired Set Point,
the heater is turned off, but
its associated pump (Pump 1
low-speed or CP) remains on
for a predetermined period
of time to ensure adequate
cooling of the heating
element, prolonging its
useful life.
WATER TEMPERA-
TURE REGULATION
Every 15 to 90 minutes the
pump will run to ensure
accurate water temperature
readings as well as avoid heater
activation in dry conditions.
After verifying pump activation
and taking a water temperature
reading if required, the system
automatically turns the heater
on to reach and maintain water
temperature at Set Point.
Indicator flashes when
taking water temperature
reading.
26
26

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Bueno Spa Chicago bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Bueno Spa Chicago in de taal/talen: Engels als bijlage per email.

De handleiding is 6.43 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info