498966
45
Verklein
Vergroot
Pagina terug
1/204
Pagina verder
33
Ch. 2 Getting Started
Getting Started
Attaching labels
Laminated tape
The backing from labels printed on laminated
tapes can easily be removed if an Auto Cut set-
ting with a half cut (1, 3, 5 or 7) was used (refer
to page 62).
Iron-on transfer tape
Iron-on transfer tape is used to transfer your text
onto garments using an iron.
1 Insert an iron-on transfer tape cassette, press
p to print the text and cut off the label.
2 Iron the garment to flatten it before transfer-
ring the text.
3 Place the label on the garment at the loca-
tion where you wish the text to be trans-
ferred.
4 Set the iron to cotton (302 to 356 °F (150 to
180 °C)), and then press down on the label
with the iron for about 15 seconds.
5 Allow the iron-on transfer to cool (for about
60 seconds), and then carefully remove the
backing paper.
Washing
Garments with transfer labels can be washed
over 20 times if the label has been transferred
correctly. Normal biological and non-biological
household detergents may be used.
The label may become discolor if the garment is
placed in bleach for an extended length of time.
Be careful that hard objects such as buckles or
buttons do not come into contact with the label
during the wash.
Do not dry clean garments that have had trans-
fer labels applied.
Drying
Garments with transfer labels may be dried
either inside or outside out.
Do not tumble dry. The transfers will come off
and may stick to other items of clothing.
NOTE
White garments made from 100% cotton with a
plain (smooth) surface are best for iron-on trans-
fers.
You can also make transfers to garments made
from 100% linen or cotton/polyester blends as
long as they have a plain (smooth) surface.
The label will not adhere properly to any cloth
with a rough surface, such as pile or denim, or
with a waterproof surface. Heat-sensitive mate-
rials, such as nylon, acetate or other similar
fibers
, are also unsuitable as they may be dam-
aged when pressing with an iron at a high tem-
perature.
Do not move the iron while pressing, otherwise
the label may move out of the desired position.
Press the iron straight down onto the cloth.
After the backing tape has been removed, the
transferred label may appear glossy. In addition,
some white spots may have appeared on the
label if it was touched while the backing tape
was peeled off. These can be removed by iron-
ing over the label with a piece of cloth placed
between the label and the iron.
Since the transferred label cannot be removed
once it is applied, make all transfers with care.
45

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Brother P-touch 9600 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Brother P-touch 9600 in de taal/talen: Engels als bijlage per email.

De handleiding is 7,31 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Brother P-touch 9600

Brother P-touch 9600 Gebruiksaanwijzing - Nederlands - 99 pagina's

Brother P-touch 9600 Gebruiksaanwijzing - Deutsch - 96 pagina's

Brother P-touch 9600 Gebruiksaanwijzing - Français - 101 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info