34
Installing your hob in all simplicity
Gas connections (Cont'd)
● Possible connections
B
OTTLED OR TANKED GAS (BUTANE/
PROPANE).
For the user's safety, we advise the
connection to be made with a rigid
pipe if this is possible, using a flexible
undulated metal tube with screw-on
connectors (maximum length 2
meters) (fig. A).
For an existing installation, where
it is not possible to fit a reinforced,
braided, flexible gas hose, the
connection can be made with a
flexible gas hose (maximum length 2
metres), with two jubilee clips: one
on the connector (fig. B), and the
other on the pressure regulator, and a
gas proof washer should be fitted
between the connector and the elbow
seal on the hob.
You will find the sealing washer and
the adaptor in the wallet delivered
with the unit.
Temperatures above 30°C would cause overheating of the gas hose. To
avoid this, check that there are no heat-producing devices nearby.
Screw on the connector with a torque not exceeding 2.5 m/daN (m/kgF).
In France, you must use a tube or a pipe featuring the "NF Gaz" logo.
Gas proof wa-
sher (supplied)
Connector
(supplied)
Jubilee clip
(not
supplied)
Flexible hose
connection
fig.B
fig. A
Flexible
undulated
metal tube
with screw-on
connectors
BUTANE/PROPANE
Pressure regulator
compulsory.
propane
butanene butanene
