646631
3
Verklein
Vergroot
Pagina terug
1/12
Pagina verder
32
5. Cut a citrus fruit in half and press the cut end of one fruit half onto the cone. Turn on
the machine and choose the speed. Choose a low speed rotation and increase to a
higher rotation if necessary. Increase speed gradually to avoid juice being ejected due to
excessively high speed rotation.
The cone will scrape the pulp out and squeeze the juice from the fruit.
6. To maximize the quantity of juice extracted from a fruit, press the fruit onto the cone several
times.
Rotating
Head
Screening
Plate
Motor
Shaft
Processing Using The Mixing Cup
1. Make sure that the Control Switch is turned to OFF (O) and that the unit is unplugged.
2. Put the sealing ring into the cutter seat slot and screw and fasten the mixing cup into the
cutter seat (clockwise to fasten and counter-clockwise to loosen). Put the mixing cup cover
and the feed cover on.
3. Screw the cutter seat clockwise into the main machine.
Note: When disassembling, (counterclockwise) do not hold and unscrew the cup only as then the
cup will unscrew from the cutter seat and the food in the cup will leak out. Hold the cup and cutter
seat together to disassemble.
MIXING FRUIT OR VEGETABLES
Peel and shell fruit or vegetables and cut into cut into small blocks or sections. Put 600g into the
mixer at a time, pour in the appropriate amount of cool boiled water and mix for 1min on high
speed.
Top Cover
Mixing Cup
Mixing Cutter
Seat
Processing Using The Mincing Cup
1. Screw the mincing cup into the cutter seat (clockwise).
2. To process meat, remove all tendons, bones and skin. Wash meat and cut into small
2 centimeter squares. Put 200g into the mincing cup at a time. Put the cup cover on the
mincing cup and mount it on the main machine according to the position shown in the
diagram. Turn clockwise and screw the mincing cup tightly into position. Turn the mincing
button switch on.
3. While mincing, add some edible oil or flavoring to the meat to produce better results.
Note: If the rotating speed slows down abruptly due to too much meat being processed at a time or
because tendons become entangled in the blade, turn the machine off and remove excess meat or
tendons.
Mincing Cup
Processing Using Grinding Cup
1. The grinding cup may be used to grind dried food into powder.
2. To grind food put 150g into the grinding cup, cover with the grinding cutter seat, and fasten
tight in a clockwise direction. Mount on the main machine according to the position shown
in the diagram. Turn clockwise and screw the grinding cup tightly into position. Turn the
grinding button switch on.
3. When grinding sesame, walnut and other oily food, add a spoon of granulated sugar into the
grinding cup for better results.
Note: If the cutter does not make contact with the food, switch off the power supply, mix the food
softly and then turn on to grind again.
Grinding Cup
TROUBLESHOOTING GUIDE
Before calling the Customer Service Number, carefully check the list below for a possible solution.
PROBLEM CAUSE/SOLUTION
Unit does not operate on any speed
or Pulse.
• Is the unit plugged in? Does the outlet work?
• Are the bowl, bowl lid and food chute lid all locked
into place? See page 4 “How to Assemble.”
Food is not chopped, sliced or
shredded uniformly.
• Packing too much food in the food chute, or
pushing too hard on the food pusher may cause the
processed food to be irregularly sliced or shredded.
Unit stops and will not switch on
again.
• Are the bowl, bowl lid and food chute lid all locked
into place? They may have moved slightly during
processing. See page 4 “How to Assemble.”
• Is the power outlet still working? Check by plugging
in a working lamp or other appliance. You may have
overloaded the circuit and blown a fuse or tripped
the circuit breaker.
• Turn the unit OFF, allow it to stand for 3 to 4 minutes
and then turn back ON.
If none of these suggestions correct the problem, DO
NOT attempt to repair the unit. Call the customer service
number to get the name of your nearest Authorized
Service Centre.
Unit emits a burning smell • There may be some residue left on the motor from
the manufacturing process, causing a slight odour
during initial use. This will go away. If a strong
odour or any visible smoke appears, unplug the unit
IMMEDIATELY and call your nearest Authorized
Service Centre.
Motor seems weak • Are you using the recommended speed for the item
you are processing?
• Are you using the recommended food size and
quantity to be processed?
DO NOT OVERLOAD YOUR PROCESSOR
CLEANING, STORAGE AND MAIMTENANCE
1. Wash bowl, lids, blade, discs, and removable drive sleeve and food pusher in hot, soapy water.
Rinse and dry thoroughly. See “How to remove food chute lid for cleaning”. To clean food
thoroughly from the bowl, lid and food chute immerse them in hot soapy water.
NOTE: Do not store the unit with lid in locked position as this may put a strain on the interlock tab.
2. Wipe base, control panel and cord with a damp cloth or sponge. To remove stubborn stains,
use a mild non-abrasive cleanser.
3. To store, place the bowl on the base. Then place the chopping/mixing blade on the motor
shaft and the slicer/shredder disc on the chopping/mixing blade. The removable drive sleeve
may be stored in the bowl. Place the lid on the bowl but do not lock.
4. Place a drop of vegetable oil on each screw in the food chute once a month.
HOW TO RELEASE THE SUCTION CUP FEET AFTER USE
The suction cup feet on the bottom of your Food Processor are designed to keep the unit stationary
during use.
To maximize the life of the suction cup feet: Lift the fully assembled Food Processor off the counter
by placing your hands under the unit (as illustrated) and lifting up one side.
be used. The electrical rating of the extension cord must be equal to or greater than the rating of
the appliance. Care must be taken to arrange the extension cord so that it will not drape over the
counter top or table top where it may be pulled by children, or accidentally tripped over.
USING YOUR FOOD PROCESSOR
How To Lock The Bowl
Align the base and the bowl as illustrated. Turn the bowl clockwise until it locks into place. The bowl
will lock onto the base in 3 different positions for user convenience.
NOTE: The food processor will not work unless the bowl is locked into position.
How To Assemble And Lock The Lid
Align the lid as illustrated, by placing a thumb on the lid tab and twisting the lid clockwise. Four
visual alignment markers are provided (see illustration), one on the bowl, one on the handle and
two on the bowl lid.
NOTE: The food processor will not work unless the lid is locked into position.
How To Operate The Controls
The control dial is conveniently located on the front of the base.
Rotate the knob clockwise to increase speed. Rotate counter-clockwise to reduce speed. For
instant on and off control, use the PULSE (P) button by rotating the knob counter-clockwise. To turn
off the machine, rotate the switch to OFF (O).
Processing Tips And Techniques
This food processor is excellent for chopping, mixing, slicing and shredding most foods. However,
to maintain peak performance, do not use your food processor for: grinding grain, coffee beans or
spices; slicing frozen meat or crushing ice.
Operating time will depend on the quantity of food being processed. Most foods can be sliced,
chopped or shredded in seconds.
NOTE: If the unit is operated for 30 seconds continuously, let the processor rest for about 3 minutes
before continuing.
Processing Using Chopping/Mixing Blade
For a more uniform consistency, start with pieces of food that are similar in size. Carrots, for
example, should all be cut in 1-inch (2.5 cm) chunks. Do not process 4-inch (10cm) pieces with
1/2- inch (1 cm) pieces.
Motor Shaft
Slicer
Shredder
Disc
Removable
Drive Sleeve
The Chopping/Mixing Blade can be used to chop coarsely, mince finely, mix or puree food to a
smooth consistency.
1. Make sure that the Control Switch is turned to the OFF (O) position and that the unit is
unplugged
2. Lock the bowl onto the base (See “How to Lock the Bowl” )
3. Place the Chopping/Mixing Blade onto the motor shaft of the food processor in the center of
the bowl. Turn slowly until the blade drops into place.
Caution: Handle carefully; the blade is sharp!
4. Lock the lid onto the bowl. Insert the food pusher into the food chute.
Do not puree or mash starchy vegetables like potatoes. They will be over-processed in a
second and turn gummy.
5. Plug the unit into the power outlet and process the food. The processing speed and time
will determine the finished consistency of the food. Use the Pulse button to avoid over
processing.
6. When finished processing, select OFF (O) or release the PULSE button.
Caution: Wait until the blades have stopped rotating completely before removing the
lid.
7. Unplug the unit.
Chopping/Mixing Blade
Motor Shaft
Processing Using Slicer/Shredder
* To slice or shred cheese, select firm cheese like Cheddar, Monterey Jack or Swiss. Tip:
Place cheese in the freezer for 30 minutes before processing.
* The Reversible Slicer/Shredder Disc has a slicing blade on one side and shredding teeth on
the other. Place on the motor shaft with the desired cutting edge facing upwards.
1. Make sure that the Control Switch is turned to OFF (O) and that the unit is unplugged
2. Lock the bowl onto the base (See “How to Lock the Bowl”).
3. Put the Slicer/Shredder Disc on the Removable Drive Sleeve with the desired side facing up
for either slicing or shredding. Lock the lid onto the bowl (See “How to Assemble and Lock
the Lid”).
4. Insert the food pusher into the chute. Always use the food pusher to feed food into the chute.
NEVER PUSH FOOD THROUGH THE CHUTE WITH YOUR HANDS.
5. Plug in the unit.
6. Select the speed. While pressing on the food pusher, rotate the switch for optimum slicing
and shredding performance or press PULSE to process the food.
NOTE: The food chute lid is designed to pivot towards the right when processing food in order to fill
the entire food chute.
7. When the food chute is empty, select OFF (O) or release from PULSE position.
Caution: Wait until the blade has stopped rotating completely before removing the lid. Unplug
the unit.
Slicer
Shredder
Disc
Motor Shaft
Processing Citrus Juice
1. Make sure that the Control Switch is turned to OFF (O) and that the unit is unplugged.
2. Lock the bowl onto the base.(See “How to Lock the Bowl”)
3. Put the Citrus Juicer Disc on the Removable Drive Sleeve (clockwise for fastening).
4. Fit the appropriate cone onto the drive shaft. (The large cone is suitable for juicing larger
citrus fruit, such as grapefruit, oranges etc. The small cone is suitable for juicing small citrus
fruit, such as lemons, limes etc.)
3

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Brabantia BBEK1113 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Brabantia BBEK1113 in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Spaans als bijlage per email.

De handleiding is 4,78 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info