78649
21
Verklein
Vergroot
Pagina terug
1/120
Pagina verder
English | 212 609 002 333 4.6.07
Open the keyless chuck 1 by turning in rotation direc-
tion n, until the tool can be inserted. Insert the tool.
Firmly tighten the collar of the keyless chuck 1 by hand
in rotation direction o until the locking action (“click”)
is no longer heard. This automatically locks the chuck.
The locking is released again to remove the tool when
the collar is turned in the opposite direction.
Keyless Chuck (PSB 700-2 RE) (see figure G)
Hold the rear sleeve 26 of the keyless chuck 1 tight and
turn the front sleeve 25 in rotation direction n, until the
tool can be inserted. Insert the tool.
Hold the rear sleeve 26 of the keyless chuck 1 tight and
firmly turn the front sleeve 25 in rotation direction o by
hand until the locking action is no longer heard. This
automatically locks the drill chuck.
The locking is released again to remove the tool when
the front sleeve 25 is turned in the opposite direction.
Screwdriver Tools (see figures HI)
When working with screwdriver bits 27, a universal bit
holder 28 should always be used. Use only screwdriver
bits that fit the screw head.
For driving screws, always position the “Drilling/Impact
Drilling” selector switch 2 to the “Drilling” symbol.
Replacing the Drill Chuck
f Before any work on the machine itself, pull
the mains plug.
Removing the Drill Chuck (see figure J)
Disassemble the auxiliary handle and set the gear
selector 11 to the centre position between the 1st and
2nd gear.
Insert a steel pin with a diameter of Ø 4 mm and
approx. 50 mm of length into the drill hole on the spin-
dle neck in order to lock the drill spindle.
Clamp the short end of an Allen key 29 into the keyless
chuck 1.
Place the machine on a stable surface (e.g. a work-
bench). Hold the machine firmly and loosen the keyless
chuck 1 by turning the Allen key 29 in rotation direction
n. Loosen a tight-seated keyless chuck by giving the
long end of the Allen key 29 a light blow. Remove the
Allen key from the keyless chuck and completely
unscrew the keyless chuck.
Mounting the Drill Chuck (see figure K)
The keyless chuck is mounted in reverse order.
Remove the steel pin from the drill hole on the
spindle neck after mounting is completed.
The drill chuck must be tightened with a
tightening torque of approx. 5055 Nm.
Operation
Starting Operation
f Observe correct mains voltage! The voltage of
the power source must agree with the voltage
specified on the nameplate of the machine.
Power tools marked with 230 V can also be
operated with 220 V.
Stand by Indicator (PSB 1000-2 RCE/
PSB 1000-2 RCA)
The stand by indicator 5 lights up when the mains plug
is plugged in and mains voltage is available. When the
machine cannot be started even though the stand by
indicator is lit, it must be taken to an authorized after-
sales service agent for Bosch power tools.
Reversing the Rotational Direction (see figure L)
The rotational direction switch 10 is used to reverse the
rotational direction of the machine. However, this is not
possible with the On/Off switch 9 actuated.
Right rotation: Press the rotational direction switch
10 through to the right stop (for drilling and driving
screws).
PSB 1000-2 RCE/PSB 1000-2 RCA: The indicator
for right-hand rotation 3 lights up.
PSB 700-2 RE/PSB 780-2 RE/PSB 800-2 RA: The
indicator for right-hand rotation 31 indicates the
selected rotational direction.
Left rotation: Press the rotational direction switch 10
through to the left stop (for loosening and unscrewing
screws and nuts).
PSB 1000-2 RCE/PSB 1000-2 RCA: The indicator
for left-hand rotation 4 lights up.
PSB 700-2 RE/PSB 780-2 RE/PSB 800-2 RA: The
indicator for left-hand rotation 32 indicates the selected
rotational direction.
Setting the Operating Mode
Drilling and Screwdriving
Set the selector switch 2 to the “Drilling”
symbol.
Impact Drilling
Set the selector switch 2 to the “Impact drill-
ing” symbol.
The selector switch 2 engages noticeably and can also
be actuated with the machine running.
Switching On and Off
To start the machine, press the On/Off switch 9 and
keep it depressed.
To lock the pressed On/Off switch 9, press the lock-
on button 8.
OBJ_BUCH-79-006.book Page 21 Monday, June 4, 2007 4:08 PM
21

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Bosch PSB 1000-2 RCA bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Bosch PSB 1000-2 RCA in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans, Turks, Deens, Zweeds, Noors, Fins als bijlage per email.

De handleiding is 6,55 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info