765451
15
Verklein
Vergroot
Pagina terug
1/169
Pagina verder
15
en
Predetermined breaking point
Predetermined
breaking point
To prevent serious damage to your
appliance if the mincer is overloaded, the
driver has a notch (predetermined breaking
point). If an overload occurs, the driver
breaks instead. However, the driver can
easily be replaced.
Otherwise spare parts with a predetermined
breaking point are not a component of our
warranty obligations.
Such spare parts can be purchased from
customer service (order no. 753348).
Operation
W Risk of injury!
Do not insert mains plug until all
preparations for working with the appliance
are complete.
Before operating the appliance
and accessories for the first time,
clean thoroughly; see “Cleaning and
servicing”.
X Fig. B
Stow perforated discs in the storage
compartment.
Stow individual parts of the sausage
filler attachment and kebbe attachment
in the pusher and close the pusher with
the lid.
Assembling the mincer
attachment
X Fig. C
Take perforated disc with required
hole diameter out of the storage
compartment.
Insert worm gear into the housing.
Put blade on the worm gear. Blades
must face the perforated disc.
Put perforated disc with the required
hole diameter on the worm gear.
Recess on the perforated disc must
be situated on the lug in the housing.
Screw on threaded ring clockwise. Do
not tighten the threaded ring too tight.
Disassembly is in reverse order.
Use for:
processing raw or cooked meat, bacon,
poultry and fish.
Do not process bones!
Process steak tartare through the
mincer twice.
Assembling sausage filler
attachment
Note: The parts of the mincer attachment
(without perforated disc and blade) are
used.
X Fig. D
Take nozzle (A) and bearing ring (D) out
of the pusher.
Insert worm gear into the housing.
Insert nozzle into the threaded ring.
Put bearing ring on the worm gear and
hold in place. Recess on the bearing
ring must be situated on the lug in
the housing.
Screw on threaded ring with nozzle
clockwise. Do not tighten the threaded
ring too tight.
Disassembly is in reverse order.
Use for:
Filling artificial and natural casings with
sausage meat.
Assembling kebbe attachment
Note: The parts of the mincer attachment
(without perforated disc and blade) are
used.
X Fig. E
Take shaper (B) and conical ring (C) out
of the pusher.
Insert worm gear into the housing.
Insert shaper into threaded ring.
Put conical ring on the worm gear and
hold in place. Recess on the conical
ring must be situated on the lug in
the housing.
Screw on threaded ring with shaper
clockwise. Do not tighten the threaded
ring too tight.
Disassembly is in reverse order.
Use for:
Shaping dough tubes.
15

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Bosch MFW2500W bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Bosch MFW2500W in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans, Pools, Turks, Deens, Zweeds, Noors als bijlage per email.

De handleiding is 2,78 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info