786202
29
Verklein
Vergroot
Pagina terug
1/499
Pagina verder
English | 29
Restart protection
The restart protection feature prevents the power tool from
uncontrolled starting after the power supply to it has been
interrupted.
To restart the tool, set the on/off switch(5) /(9) to the "off"
position and then switch the power tool on again.
Impact shutdown
The integrated impact shutdown switches the power tool off
as soon as it hits the floor. The status indicator(35) then
flashes red. To restart the tool, set the on/off
switch(5) /(9) to the "off" position and then switch the
power tool on again.
Run-out brake
The power tool is fitted with the electronic
Bosch X Brake System. When it is switched off,
the abrasive tool is brought to a complete stop
within a few seconds. This means that the run-
out time is significantly shorter than for angle
grinders without a run-out brake and enables the power tool
to be set down sooner.
User interface (see figure E)
(GWX 18V-15 SC / GWX 18V-15 PSC)
The user interface (4) is used to preselect the speed and to
indicate the status of the power tool.
Speed preselection
(GWX 18V-15 SC / GWX 18V-15 PSC)
In the default setting, 3 speed levels are preset. A special application (Bosch Toolbox App) can be used to program up to 6
speed levels.
If the number of speed levels is changed, the values of the individual levels are adjusted by default. In this case, the speed
level/mode indicator (33) lights up white. When a speed value is programmed individually, the speed level/mode indicator
(33) lights up blue at this speed level (i.e. not according to a default setting). The individual adaptation of speed levels is pos-
sible in steps of 200min-1 each. Observe the ascending logic of the steps (2≥1 / 3≥2 etc).
The information in the tables below describes the preset speeds (default settings) for each programmed number of levels.
GWX 18V-15 SC
GWX 18V-15 PSC
Basic speed setting at level
123456
[min-1] [min-1] [min-1] [min-1] [min-1] [min-1]
Number of speed settings
23400 9800
33400 6600 9800
43400 5600 7600 9800
53400 5000 6600 8200 9800
63400 4600 6000 7200 8600 9800
The specified speed setting values depend on the rechargeable battery in use, the battery's state of charge and the tool's operating temperature.
You can use the button for speed preselection (32) to preselect the required speed, even during operation. The information in
the table below describes the recommended values for the default settings with 3 preset speed levels.
Material Application Application tool Speed preselection
level GWX 18V-15 SC
GWX 18V-15 PSC
[min-1]
Metal Removing paint Sanding sheet 1 3400
Metal Brushing, removing rust Cup brush, abrasive disc 1 3400
Stainless steel Grinding Grinding disc/fibre disc 2 6600
Metal Rough grinding Grinding disc 3 max.
Metal Cutting Cutting disc 3 max.
Stone Cutting Diamond cutting disc 3 max.
uThe rated speed of the accessory must be at least
equal to the maximum speed marked on the power
tool. Accessories running faster than their rated speed
can break and fly apart.
Rechargeable battery
Bosch sells some cordless power tools without a re-
chargeable battery. You can tell whether a rechargeable bat-
Bosch Power Tools 1 609 92A 6WT | (24.06.2022)
29

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Bosch GWX 18V-15 P bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Bosch GWX 18V-15 P in de taal/talen: Alle talen als bijlage per email.

De handleiding is 29.9 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info