786202
28
Verklein
Vergroot
Pagina terug
1/499
Pagina verder
28 | English
Angle grinder GWX 18V-15 C GWX 18V-15 SC GWX 18V-15 P GWX 18V-15 PSC
Max. signal rangeF) m 30 30 30 30
A) Rated no-load speed for the selection of appropriate application tools in accordance with ENIEC62841-2-3. The actual no-load speed is
lower for safety reasons and according to production tolerances.
B) Measured at 20–25°C with rechargeable battery ProCORE18V8.0Ah and depending on the battery's state of charge as well as the tool's
operating temperature
C) Depends on rechargeable battery(7), protective guard((17), (15), (18)) and auxiliary handle((11), (12)) in use
D) Limited performance at temperatures <0°C
E) The mobile terminal devices must be compatible with Bluetooth® Low Energy devices (version 4.2) and support the Generic Access Profile
(GAP).
F) The signal range may vary greatly depending on external conditions, including the receiving device used. The Bluetooth® range may be signi-
ficantly weaker inside closed rooms and through metallic barriers (e.g. walls, shelving units, cases, etc.).
Noise/Vibration Information
GWX 18V-15 C GWX 18V-15
SC GWX 18V-15 P GWX 18V-15
PSC
3601JH64.. 3601JH65.. 3601JH6F.. 3601JH6G..
Noise emission values determined according toENIEC62841-2-3.
Typically, the A-weighted noise level of the power tool is
Sound pressure level
Sound power level
UncertaintyK
Wear hearing protection!
dB(A)
dB(A)
dB
93
101
3
93
101
3
89
97
3
89
97
3
Vibration total values ah (triax vector sum) and uncertaintyK determined according toENIEC62841-2-3:
Grinding surfaces (roughing) and abrasive cutting:
ah
K
m/s2
m/s2
6.0
1.5
6.0
1.5
4.8
1.5
4.8
1.5
Disc sanding:A)
ah
K
m/s2
m/s2
2.5
1.5
2.5
1.5
< 2.5
1.5
< 2.5
1.5
A) determined with medium-hard backing pad
Grinding thin metal sheets or other materials that tend to easily vibrate with a large surface area can cause the noise emission value to increase by
up to 15dB. Suitable, heavy damping mats can reduce the increased noise emissions. Increased noise emissions must be taken into considera-
tion, both for the risk assessment of the noise output and for selecting suitable hearing protection.
The vibration level and noise emission value given in these
instructions have been measured in accordance with a
standardised measuring procedure and may be used to com-
pare power tools. They may also be used for a preliminary
estimation of vibration and noise emissions.
The stated vibration level and noise emission value repres-
ent the main applications of the power tool. However, if the
power tool is used for other applications, with different ap-
plication tools or is poorly maintained, the vibration level
and noise emission value may differ. This may significantly
increase the vibration and noise emissions over the total
working period.
To estimate vibration and noise emissions accurately, the
times when the tool is switched off or when it is running but
not actually being used should also be taken into account.
This may significantly reduce vibration and noise emissions
over the total working period.
Implement additional safety measures to protect the oper-
ator from the effects of vibration, such as servicing the
power tool and application tools, keeping their hands warm,
and organising workflows correctly.
Kickback stop
If there is a sudden kickback in the power tool,
e.g. jamming in a separating cut, the power
supply to the motor will be interrupted elec-
tronically. The kickback stop indicator(31)
then lights up. When kickback stop is activ-
ated, the status indicator (35) flashes red.
To restart the tool, set the on/off switch(5) /(9) to the "off"
position and then switch the power tool on again.
1 609 92A 6WT | (24.06.2022) Bosch Power Tools
28

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Bosch GWX 18V-15 P bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Bosch GWX 18V-15 P in de taal/talen: Alle talen als bijlage per email.

De handleiding is 29.9 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info