577926
6
Verklein
Vergroot
Pagina terug
1/76
Pagina verder
6
ENGLISH
Labels
Electrical safety
X If the supply cord is damaged, it must be replaced by the
manufacturer or an authorised Black & Decker Service
Centre in order to avoid a hazard.
Extension cables
X A 2 or 3 core cable may be used as the appliance is
double insulated and of class II construction.
X Up to 30m (100 ft) can be used without loss of power.
Features
1. Nozzle
2. Air inlet holes
3. Pivot handle unlock button
4. Heat setting switch (on/off)
5. Hanging hook
6. Stand
7. Heat guard
fig. A
10. Black & Decker nozzle
fig. G - J
12. Fish tail nozzle
13. Glass protection nozzle
14. Spoon reflector nozzle
15. Cone nozzle
16. Manual scraper
Assembly (fig. A and B)
Warning! Before assembly, make sure that the appliance is
switched off and unplugged.
Warning! Make sure that the appliance is switched off and
cool before fitting or removing the accessories.
Your heat gun is supplied with an integrated Black & Decker
scraper.
X Align the slot of the scraper blade (9) with the protrusion
on the blade holder (10) and position under the retaining
screw (8).
Note: Make sure that the hole in the scraper (9) is to the left
of the screw (8) in the blade holder (10).
X Tighten the retaining screw (8).
X Place the blade holder (10) over the nozzle outlet (1).
Make sure that it is aligned; the small bump on the
inside of the blade holder (10) engages with the recess
on the nozzle.
X Tighten the blade holder clamp screw (11).
Your heat gun (KX1693 only) is also supplied with the
following four nozzles. For best results it is recommended
that nozzles are always used.
Fish tail nozzle (12) - Ideal for removing paint or varnish
from large flat surfaces.
Cone nozzle (15) - Concentrates the air stream on a smaller,
more concentrated area.
Spoon reflector nozzle (14) - disperses the air evenly
around the whole object.
Glass protector nozzle (13) - for the protection of glass
during paint stripping.
X Fit the connecting piece of the accessory over the
nozzle (1).
Your appliance is also supplied with a manual scraper for
stripping paint and varnish.
Dual position handle (fig. C)
Your appliance is a highly versatile heat gun with a dual
position handle which can be used comfortably for many
different applications. It is designed to be used in either pistol
grip mode (a) or in-line mode (b).
X To switch between positions hold down the handle
unlock button (3) and rotate the handle 180 degrees.
Use
Operating your heat gun (fig. D)
X To turn the heat gun on, push the heat setting switch (4)
forward to the 1, 2 or 3 position (position 3 is on the
KX1693 only).
Note: The position numbers represent the heat settings
described in the technical data table at the end of the
manual.
X To switch your heat gun off, pull the heat setting switch
(4) back to reveal the off (O) position.
Using the appliance
X Allow the appliance to heat up for a few seconds before
use.
Note: At first use some smoke may emit from the nozzle.
This is normal and will soon decrease.
X Low - use a low temperature setting for drying paint and
varnish, removing stickers, shrinking insulation tubes,
and thawing frozen pipes.
Read all of this manual carefully before using your
appliance.
This product is double insulated; therefore no earth
wire is required. Always check that the power
supply corresponds to the voltage on the rating
plate.
6

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Black Decker KX1693 T1 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Black Decker KX1693 T1 in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans, Deens, Zweeds, Noors, Fins als bijlage per email.

De handleiding is 0,94 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Black Decker KX1693 T1

Black Decker KX1693 T1 Gebruiksaanwijzing - Polski - 12 pagina's

Black Decker KX1693 T1 Gebruiksaanwijzing - Türkiye - 12 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info