497057
25
Verklein
Vergroot
Pagina terug
1/80
Pagina verder
25
ENGLISH
Make sure that you remove the blade-changing
spanner from the saw blade locking screw before
you switch on the circular saw.
Do not switch off the power tool unless the saw
blade is running freely.
When sawing
Only hold your saw by the handles provided. Do not
hold your saw in a position that could result in a
poor grip and control of the saw.
Always ensure that there is sufficient clearance
below the material being cut and the bench or
support to allow the safety guard to rotate fully.
All nails and metal objects must be removed from
the workpiece before you commence sawing.
Do not attempt to saw extremely small workpieces.
After switching off, never attempt to stop the
saw blade by pressing against the side of the blade.
Never put the circular saw down on a table or work
bench unless you have previously switched off.
Never operate the circular saw with the saw blade
turned upwards or to the side.
Operational protection devices
Ensure that all devices screening the saw blade are
in perfect working order.
Never jam the saw guard.
Free a jammed saw guard immediately and do not
use the saw if the guard is jammed.
Only use the guard retracting lever provided should
the blade guard need to be moved when
commencing a cut.
The riving knife must not be removed.
The riving knife should be correctly set.
Checking and changing the saw blade
Only saw blades conforming to the specifications
contained in these operating instructions may
be used.
Saw blades whose main part is thicker or whose
pitch is smaller than the riving knife’s thickness
should not be used.
Saw blades made of high alloy, high speed steel
(HSS steel) should not be used.
Only sharp saw blades in perfect working condition
should be used; cracked or bent saw blades should
be discarded and replaced at once.
Ensure that the saw blade is securely fixed and
turns in the correct direction.
Metal cutting and stone cutting discs should not be
used with this saw.
Save these instructions!
DOUBLE INSULATION
The tool is double insulated. This means that all
the external metal parts are electrically insulated
from the mains power supply. This is done by
placing insulation barriers between the
electrical and mechanical components making it
unnecessary for the tool to be earthed.
Note: Double insulation does not take the place
of normal safety precautions when operating the
tool. The insulation system is for added protection
against injury resulting from a possible electrical
insulation failure within the tool.
ELECTRICAL SAFETY
Be sure the supply is the same as the voltage given on
the rating plate. The tool is fitted with a two-core cable
and plug.
MAINS PLUG REPLACEMENT (UK ONLY)
Should the mains plug need replacing and you are
competent to do this, proceed as instructed below.
If you are in doubt, contact a Black & Decker service
agent or a qualified electrician.
Disconnect the plug from the power supply.
Cut off the plug and dispose of safely. A plug with
bared copper conductors is very dangerous if
engaged in a live socket outlet.
Only fit BS1363A approved plugs fitted with the
correctly rated fuse.
Note: Fuses do not give personal protection against
electric shock.
The cable wire colours, or a letter, will be marked at
the connection point of most good quality plugs. Attach
the wires to their respective points in the plug (see
diagram). Brown is L (live) and blue is N (neutral).
Fit a plug
approved
to BS1363A
Connect
blue to
N (neutral)
Make sure that
the outer sheath
of the cable is held
firmly by the clamp
Fit a 5 amp fuse
Connect
brown to
L (live)
230 volts AC
only. Never use
a light socket
N
L
E
Before replacing the top cover of the plug ensure
that the cable restraint is holding the outer sheath of
Fit a 13 amp fuse
CD600 Circ saw ML p01-41 07/01/2000, 3:43 pm25
25

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Black-Decker-KS865N

Zoeken resetten

  • IK heb een BLACK EN DECKER KS 865N ZONDER gebruik aanwijzing. en ik had er graag een gehad in het Nederlands alstublieft Groetjes François. Gesteld op 5-6-2022 om 14:59

    Reageer op deze vraag Misbruik melden

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Black Decker KS865N bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Black Decker KS865N in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans, Deens, Zweeds, Noors, Fins als bijlage per email.

De handleiding is 1,78 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info