700090
12
Verklein
Vergroot
Pagina terug
1/112
Pagina verder
12
ENGLISH
(Original instructions)
Switch on the appliance by pushing the On/Off switch
(1) upwards (fig.j insert) and use a sweeping motion; the
debris/leaves will be sucked up the tube, and thrown into
the collection bag (10) (fig. J).
u As the bag lls, the power of the suction will decrease,
switch off the appliance and unplug from the mains power
supply.
u Unclip the the catch (10a) on the back pack collection bag
(g K).
u Unfold the opening of the back pack collection pack (g L).
u Open the back pack collection pack (g M) and proceed to
empty its contents.
u To seal the collection bag, hold the exible bars together
and roll 2-3 times (g N).
u Latch the retaining clip (10a) as shown in gure O.
Warning! Never remove the collection bag without rst turning
off and unplugging the appliance.
Note: If the suction decreases and the bag is not full, the
vacuum tube is probably clogged with debris. Turn off and
unplug the vacuum and clear the tube before continuing.
u When task is complete, rotate the assembled vacuum
tube anticlockwise to release the bayonet fixing. Insert the
rod (14) into the fan guard release (13) and push upwards
to release the assembled vacuum tube. Remove the
assembled vacuum tube from the powerhead as shown in
figure P.
u Replace the fan guard assembly as shown in figure Q.
u Rotate the fan guard assembly clockwise as shown in
gure R.
Blower mode (g. S, T, U, V)
u Assemble the upper blow tube (7), the lower blow tube (8)
and the optional concentrator (9) as shown in figure S.
u Push the assembled blow tube onto the vacuum outlet
(11a) until the lock engages tightly with the blow tube as
shown in figure T.
Warning! Never operate in Blow mode without the blow tube
firmly in place.
u Hold the blow tube approximately 180 mm above the
ground, switch on the appliance and using a sweeping
motion from side to side, advance slowly keeping the
accumulated debris/leaves in front of you (fig. U).
u Once you have blown the debris/leaves into a pile, you
can remove the blow tube assembly by inserting the rod
(14) into the aperture on the vacuum head and pushing
down to release the lock as shown in figure V.
u Now you can convert to vacuum mode and collect the
debris.
Troubleshooting
Problem Possible solution
Failure to operate
Check the connection to the power supply
Check the fuse in the plug, if blown, replace
(UK only).
Check that the blow/vacuum tube assembly is
correctly tted to the powerhead.
If the fuse continues to blow - immediately
disconnect from the mains power supply and
consult your local BLACK+DECKER
authorisedrepair agent.
Poor vacuum/high
pitched whine
Switch off - disconnect from the mains power
supply, debris should fall clear of the tube.
Remove and empty the collection bag.
Check that both the inlet and exit ports on the
vacuum tube are clear.
Remove any debris from the fan area.
If poor vacuuming continues - immediately
disconnect from the mains power supply and
consult your local BLACK+DECKER
authorised
repair agent
Maintenance
Your BLACK+DECKER appliance has been designed
to operate over a long period of time with a minimum of
maintenance.
Continuous satisfactory operation depends upon proper
appliance care and regular cleaning.
u Keep the appliance clean and dry.
u Remove any leaves stuck to the inside of the vacuum
tube.
u Regularly clean the ventilation slots with a clean, dry paint
brush.
u Regularly clean the collection bag and ensure that it is
clean and empty after each use.
u To clean the appliance, use only mild soap and a damp
cloth. Never let any liquid get inside the tool and never
immerse any part of the tool into liquid. Do not use any
abrasive or solvent-based cleaner.
u Self lubricating bearings are used in your product,
therefore lubrication is not required.
Mains plug replacement (U.K. & Ireland only)
If a new mains plug needs to be tted:
u Safely dispose of the old plug.
u Connect the brown lead to the live terminal in the new
plug.
u Connect the blue lead to the neutral terminal.
Warning! No connection is to be made to the earth terminal.
Follow the tting instructions supplied with good quality plugs.
Recommended fuse: 13 A.
12

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Black Decker BEBLV301 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Black Decker BEBLV301 in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans, Deens, Zweeds, Noors, Fins als bijlage per email.

De handleiding is 8,57 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info