14
5.3 Taking measurements
After all parameters have been entered, you can now measure your weight, body fat and the
other data.
– Switch on the scale by briefly stepping on the platform.
– Select the memory position in which your personal parameters are stored by pressing the
“User”buttonseveraltimes.Theseparameterswillthenappearinturnuntilthe“0.0”display
appears.
– Step on the scale with bare feet and make sure you are standing still on the stainless steel
electrodes.
Important: There may be no contact between feet, legs, calves and thighs. Otherwise the mea-
surement will not be performed correctly.
The following display then appears:
1. Weight in kg with interpretation KG
2. Body fat in % with interpretation BF
3. Body water in % with interpretation
4. Muscle percentage in %
with interpretation
5. Basal metabolic rate in Kcal
The display then changes from muscle percentage and basal metabolic rate to:
6. Bone mass in kg
7. Active metabolic rate in Kcal
Pressing any of the buttons will show the results more rapidly.
Up to 5 results are automatically saved in the data memory. Incorrect measurements indicated
with“Err”arenotsaved.
5.4 Measured data recall
The last 5 measurements can be recalled.
– Switch on the scale by briefly stepping on the platform.
– Select the memory position in which your personal parameters are stored by pressing the
“User”buttonseveraltimes.Thesethenappearinturnuntilthe“0.0”displayappears.
–Assoonas“0.0”appears,youcanrecallthelastdatameasuredwiththeupbuttons.
– Press the up button s repeatedly to display the next older data. After a maximum of 5 mea-
surements,thescalereturnstothe“0.0”displayandisreadyformeasurement.
If user settings are changed (e.g. age), the measured data memory is deleted.
6.Evaluationofresults
Trend display
This scale hase a trend display, in which the value currently measured is compared with the ave-
rages of the last 5 measurements.
– Trend display up s: present value is higher than the average of the last 5 measurements.
– Trend display down t: present value is lower than the average of the last 5 measurements.
– Trend display up and down s t: present value is the same as the average of the last 5 mea-
surements.
