572354

Bauknecht WA 9986-1 Handleiding

3
Verklein
Vergroot
Pagina terug
1/17
Pagina verder
5019 401 05497
Add detergent as indicated on the front page and as described in the
chapter “Detergent and Additives” in your Instructions for Use.
1. Turn the
programme selector
to the desired
programme. The display shows the programme duration
in hours and minutes as well as the predefined
temperature. The
“Start”
button blinks.
2. The
temperature
can be altered by pressing the
“Temperature” button.
3. The indication lamp of the predefined
spin speed
lights
up; in case you want to set another spin speed, press the
“Variable spin” button.
Push the button(s) of any option(s) desired - the respective
indication lights up.
When the combination of programme and additional option(s) is
not possible, the indication lights switch off automatically.
Unsuitable combinations of options are deselected automatically.
“Prewash” button
• Only for heavily soiled loads (for example sand, granular dirt)
sensible. Increases the cycle time by approximately 15 min.
• Do not use liquid detergent for the main wash when
activating the Prewash option.
“Rinse hold” button
• The laundry remains in the last rinse water without
progressing to the final spin cycle to avoid creasing and
prevent colours from changing.
• This option is particularly recommended for the
programmes “Synthetics”, “Daily load” and “Delicates”.
• It is particularly useful if you want to postpone spinning to
a later time, or if you want to drain only.
• If you select “Rinse hold”, do not leave the laundry to soak
for too long.
Note:
The programme stops to “Rinse hold” at the time the
“Rinse hold” light in the programme sequence indicator is on.
The indication lamp next to the
“Start”
button blinks.
Terminate the “Rinse hold” option:
• Press the
“Start”
button; the programme will terminate
automatically with the final spin cycle for the present wash
programme.
• If you do not wish to spin the clothes, turn the programme
selector to the “Drain” programme and press the
“Start”
button.
“Intensive rinse” button
• More water is added and rinse cycle is prolonged.
• This option is particularly suitable for areas with very soft
water, washing baby linen and helps people with allergies.
“Easy ironing” button
• Can be used together with “Cotton”, “Synthetics” and
“Daily load” programmes to make ironing easier.
• Increases the water quantity and the clothes are spun very gently.
“Variable spin” button
• Every programme has a predefined spin speed.
• Press the button to set another spin speed.
• If spin speed “0” is selected, the final spinning is cancelled
but intermediate spin peaks remain during rinse. The
water is drained out only.
“Eco” button
• With a modified temperature profile and a slightly
prolonged washing duration, the optimum combination of
excellent washing result and even lower energy
consumption is achieved.
CONSUMPTION DATA
Programme
Temperature
(°C)
Load
(kg)
Water
(l)
Energy
(kWh)
Approx. Programme Duration
(hours : minutes)
*
White Cotton / Hygienic + 95 6.0 59
**
1.90 2:00
Coloured Cotton with “Eco”
***
60 6.0 49 1.02 2:20
Coloured Cotton 60 6.0 49 1.14 2:10
Coloured Cotton 40 5.0 56 0.70 2:00
SuperEco 60 6.0 51 0.72 4:00
Synthetics 60 2.5 50
**
0.80 1:35
Synthetics 40 2.5 46 0.50 1:20
Daily load 40 3.0 41 0.50 1:00
Quick wash 30 3.0 41 0.40 0:30
Delicates 30 1.5 60 0.50 0:45
Wool 40 1.0 60 0.50 0:45
Handwash 40 1.0 45 0.50 0:40
Lingerie 30 1.0 45 0.40 0:40
Consumption values were measured in normalized conditions in compliance with Standard IEC/EN 60 456. Consumption data in the home
may vary with respect to the values in the table in relation to the water supply pressure and temperature, the load and the type of wash.
*
The time indicated on the display can deviate from the values in the table, because it takes into account the household
conditions applicable at that time.
**
To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains the water out.
***
Reference Programme for Energy Label.
ADD DETERGENTS, CLOSE THE DOOR
AND SELECT THE PROGRAMME
SELECT ANY DESIRED OPTION
If there is a programme setting which you use frequently, the
appliance offers the possibility to save one setting for each
programme so that it can be used again by just pushing one button.
• Select the desired programme, temperature, spin speed
and option(s), push and hold the
“Favourites”
button for
at least 3 seconds. The lamp next to
“Favourites”
shortly
blinks and then lights up - the programme setting is saved.
Next time you want to use your individual programme setting,
select the programme, push the
“Favourites”
button and
start by pushing
“Start”
.
If you want to replace the saved programme setting by
another one:
• Push the programme button, select temperature, spin speed
and options as desired and then press and hold the
“Favourites”
button for at least 3 seconds. The previously
saved programme setting will be replaced by the new one.
The “Start delay” allows to run the machine at the consumer’s
convenience, for example at night when electricity is cheaper.
Do not use liquid detergent when activating the “Start Delay”.
• Select programme, temperature and options.
• Press the “Start delay” button to select the delay time by 1
to 23 hours;
• Press the
“Start”
button.
The indication light over the “Start delay” button starts
blinking, and the countdown of the delay time begins. During
the whole countdown, the light of the “Start delay” button as
well as the dot on the display keep blinking.
• The time delay indication disappears when the
programme starts and it is replaced by the remaining
programme time.
• Once having pressed the
“Start”
button, the number of
hours preselected can be reduced by pressing and holding
the “Start delay” button. From 1 hour on, the delay time
can also be reduced in steps of 10 minutes.
To cancel the “Start delay”
...before you press the “Start” button:
• Turn the programme selector to another position or press
the
“Reset”
button.
...after having pressed the “Start” button:
• Press the
“Reset”
button for at least 3 seconds - the start
delay time disappears from the display.
Open the tap and press the
“Start”
button. The indication lamp
over the
“Start”
button lights up. The programme sequence
indicator shows the current programme phase, running from left
to right through Wash, Rinse, Spin/Drain.
The display shows the remaining programme time. Due to
variations in load and temperature of inlet water, the remaining
time is newly calculated in certain programme phases. If this is the
case,
an animation appears on the display
.
Before starting and after end of a programme, the lamp lights
to show that the door can be opened. As long as a wash
programme is running, the door remains locked and must on
no account be forced open. In case you have an urgent need to
open it during a running programme, refer to “Cancel (Reset)
a running programme before the end”.
“Service”
Lighting up of the “Service” indication can be caused by a fault
in an electrical component. Refer to the “Troubleshooting
Guide” in your Instructions for Use; if the fault persists, contact
our After Sales Service.
“Water tap closed”
The appliance has no or insufficient water supply. Open the
water tap; if the indication still lights up, refer to the
“Troubleshooting Guide” in your Instructions for Use.
“Clean pump”
Waste water is not pumped out. Check whether the drain
hose is kinked or the filter must be cleaned; in the latter case
refer to the Instructions for Use (“Removing the Filter”).
• All the lights of the programme sequence indicator are
off, and the “Door open” indication lights up.
1. Turn the programme selector to the “Off/O” position.
2. Close the water tap.
3. Open the door and unload the machine.
4. Leave the door ajar to allow the drum to dry.
1. Press the
“Start”
button to pause the programme. The
light blinks.
2. Select the new programme, temperature, any options
and another spin speed if you want.
3. Press the
“Start”
button again. The new programme
continues at the same position where the previous
programme was interrupted. Do not add detergent for
this programme.
The
“Reset”
button cancels a programme before the end.
• Press the
“Reset”
button for at least 3 seconds. “rES”
appears on the display. Any existing water is drained out
before the door can be opened.
SAVE YOUR FAVOURITE PROGRAMMES
START DELAY
PROGRAMME START
“DOOR OPEN” INDICATION
RED INDICATIONS
PROGRAMME END
CHANGE PROGRAMME AND/OR OPTIONS
AFTER PROGRAMME START
CANCEL (RESET) A RUNNING
PROGRAMME BEFORE THE END
40105497GB.fm Page 2 Thursday, June 18, 2009 10:16 AM
Black process 45.0° 150.0 LPI
3 …

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Bauknecht WA 9986-1 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Bauknecht WA 9986-1 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,9 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Bauknecht WA 9986-1

Bauknecht WA 9986-1 Gebruiksaanwijzing - Deutsch - 17 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info