You must update your operating system to a minimum
of version 9.2. Once done, you will not need any special
drivers or extensions. You simply plug the AV400 into
your Macintosh as enumerated above, and within a
few seconds, the AV400 will be recognized as a mass
storage device (Hard Disk) and mount on the desktop.
You can now use the Hard disk called JUKEBOX like any
other external hard disk.
We highly recommend that you update to Macintosh OS 10.2.4
or later.
version 10.1 may mount the AV400 as a hard disk on your desktop, but
ONLY after a very long wait, up to 10 minutes. Version 10.0 of OS X does
not have the ability to properly recognize a mass storage device such as
the AV400.
If you have OS 10.2, you must update to version 10.2.4 or newer. This is a
free update from Apple
®
Computer. You will not require
any special installation of software drivers or extensions.
You simply plug the AV400 into your Macintosh as
enumerated above, and within a few seconds, the AV400
will be recognized as a mass storage device (Hard Disk)
and mount on the desktop. You can now use the Hard
disk called JUKEBOX like any other external hard disk.
download the driver for this old version of Windows. Go to the section
Download > Drivers and download the ‘All USB Drivers’ package. When
recognize the hardware and ask to have drivers installed. Carefully follow
the instructions below. After installation of the drivers and restarting the
and the AV400 using Windows
®
Explorer. Be careful also to understand the
correct disconnection procedure in section 16.2. Incorrect disconnection
can cause your computer to freeze or you may loose data.
1. Windows 98SE has recognized a new
piece of hardware (the AV400) and
starts its wizard. Click on
.
2. Click on the button Search for the
best driver. Now click on .
3. 4.
