Handleiding Arcam diva dv137 (pagina 18 van 26) (Engels)

138742

Verklein

Vergroot

Pagina terug

1/26

Pagina verder

DV137

E-18

Speaker set-up

This menu screen allows you to specify the speaker conguration that is connected to the

analogue ouputs of your DVD player. (If you are using the HDMI or SPDIF audio outputs,

this speaker conguration should be performed in your surround-sound receiver.) It is

important that this conguration reects accurately the actual situation, otherwise audio

quality may be severely compromised.

The speakers are indicated as follows:

Front L/R This is the setting for the ‘Front’ speakers

Centre This is the ‘Centre’ speaker setting.

Surround

L/R

This is the setting for the ‘Surround’ speakers (normally next to or

behind the user).

Subwoofer This is used to indicate whether a subwoofer is connected.

For each speaker, the player can be congured to send either audio with the full frequency range

of the source material, or with a reduced frequency range. The reduced frequency range option is

used normally when ‘satellite’ speakers are used for the surround channels; these cannot handle low

frequency information. Full frequency speakers are commonly called ‘Large’ speakers, with reduced-

range speakers given the name ‘Small’. Low frequency information is re-routed from ‘small’ speakers to

‘large’ speakers, or to the subwoofer (depending on the speaker conguration).

NOTES:

1. Any speaker that is not connected should be identied by selecting ‘Not Present’ for

that speaker.

2. Although the DV137 is very exible in the speaker congurations it can handle, some

restrictions have been applied. For example, if no subwoofer is present, then it is not

possible to congure the Front speakers to be ‘Small’ since there would be nowhere

to redirect the low frequency information.

Sub with stereo

This setting is relevant to 2-channel source material only (such as CDs). It controls whether the

low frequency information is redirected to the subwoofer, or not. This item can be changed only if a

subwoofer is specied as present in the system.

Not used No redirection of low-frequency information occurs; all the audio is sent to the

Front speakers.

Bass

redirected

Low-frequency information is redirected to the subwoofer, with the remaining

(higher-frequency) information sent to the Front speakers.

Bass

duplicated

All the audio is sent to the Front speakers. In addition, the low-frequency

information is duplicated to the subwoofer.

Crossover Frequency

This setting denes the frequency at which bass-redirection begins. Frequencies below this level are

redirected from ‘small’ speakers to the Fronts or to the subwoofer; frequencies above this level are not

redirected. The redirection frequency is the same for all the speakers in a system.

The optimum crossover frequency depends on the characteristics of your speaker set-up, and is best

determined by experimentation. We suggest you start at 100Hz.

Delay set-up

The delay set-up menu page allows two different types of delay to be congured: those

due to speaker positioning and those due to video post-processing.

Speaker positioning

The relative positioning of speakers within a room (particularly a large room) may

mean that sound from some speakers arrives at the listener later than sound from

others. By altering the delay settings for the different speakers, this difference in

arrival time can be reduced or eliminated.

When setting the delay, it should be imagined that the listener is sitting in a circle of

the speakers; the delay indicates the distance of the speaker from the listener.

Measurement Units

Your DV137 allows you to choose the measurement units that you feel most comfortable with:

centimetres or feet.

Delays

Delays for the front, centre and surround speakers can be set using the associated sliders.

Specifying the different speaker distances will cause a slight delay to be added to the output of the

closest speakers so that the sound from all the speakers will arrive at the listener at the same time.

Note that these delay sliders affect only the analogue and the HDMI outputs (although the HDMI

output is affected only when multi-channel uncompressed audio is requested by the receiver, not

otherwise). The SPDIF digital audio output is never affected by changes here. If you are using the

SPDIF connection between the DV137 and your receiver, set all of the delays to zero.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

lees eerst de handleiding door;
controleer of uw vraag al eerder door iemand anders is gesteld;
probeer uw vraag zo duidelijk mogelijk te stellen;
heeft u een probleem en al geprobeerd om dit op te lossen, vermeld dit erbij aub;
heeft u een oplossing gekregen van een bezoeker dan horen wij dat graag in dit forum;
wilt u een reactie geven op een vraag of antwoord, gebruik dan niet dit formulier maar klik op de knop 'reageer op deze vraag';
uw vraag wordt direct op de website gezet; vermijd daarom persoonlijke gegevens in te vullen;

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Arcam diva dv137 Handleiding

Hulp nodig? Stel uw vraag in het forum

Misbruik melden

Product:

Spelregels forum

Abonneren

Ontvang uw handleiding per email

Stel vragen via chat aan uw handleiding

Uw handleiding is per email verstuurd. Controleer uw email

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

U heeft geen emailadres opgegeven

Uw vraag is op deze pagina toegevoegd

Info