541727
14
Verklein
Vergroot
Pagina terug
1/28
Pagina verder
- SUB1-2/SUB3-4/MAIN MIX
25
26
- AUX RETURN SOLO
The function of AUX RETURN SOLO is like the channel SOLO button. Engaging it sends the signal from AUX
RETURN (1-4) to the CTRL OUT, PHONES outputs and METERS display. It can also be affected by SOLO
mode button, and the LED next the button will illuminate.
27
- SUBGROUPS ASSIGN TO MAIN MIX
Through these switches, you can operate the subgroup faders as a master control for assigning the subgroups
to MAIN MIX. Engage the LEFT switch to send the corresponding subgroup signal to MAIN MIX L, and the RIGHT
switch for MAIN MIX R. When engaging the both switches, the signal will be sent to L/R of MAIN MIX.
These three buttons are configured for AUX RETURN4, they can be regarded as the signal assignment switches.
Engage the SUB1-2 button to assign the stereo signal from AUX RETURN4 to Submix1/2; in the same way,
SUB3-4 for Submix3/4, MAIN MIX for MAIN MIX buses.
13
28
- SUBGROUPS
These faders are used to control the levels of signals sent to the SUBGROUPS OUT, the adjustable range is
from - to +10dB. Any channel that is assigned to the subgroups, not muted and not turned down will be assi-
gned to the SUB OUTS.
29
- MAIN MIX LEVEL
This fader sets the amount of signal sent either to the Main Mix Output sockets or to the Tape Output.
30
- LED METER
The stereo 12 segments LED Meter will indicate the signal level sent to CTRL ROOM and PHONE outputs.
31
- 2TK TO MIX
Engaging this switch allows you to combine the 2 TRACK Output with the MAIN MIX. In other words, feeds the
2TRACK IN signals into MAIN L/R output.
32
- SOLO MODE
This button provides two modes: up for PFL (Pre-Fader-Listen) mode, and down for AFL (After-Fader-Listen) mode.
Engage the button, the soloed signal will output following the LEVEL control, otherwise, release the button will
output the soloed signal before the level control
Please note that the SOLO function can never affect the mix at main recording output, and also can't be affected
by channel's MUTE switch.
14

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Alto Professional L-16 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Alto Professional L-16 in de taal/talen: Engels als bijlage per email.

De handleiding is 1,04 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info