Now please let the battery pack charge for at least 24 hours
CONTINUOUSL
Baby unit:
Connect the
power adaptor
with the round
plug to the
bottom of
the baby unit
according to the
below picture
a mounting bracket is included for fixing
the baby unit onto a wall
the camera lens can be oriented
maintain a distance of at
least 1 meter between the
baby unit and the baby
Baby unit:
1. Light sensor
2. Camera lens
3. infrared LEDs (for night
lighting)
4. button: start/stop button
for the lullabies
5. remains lit when the
connection with the parent
unit is active
asheswhenthere’sno
active connection with the
parent unit
6. built-in microphone
7. button: to play the
next lullaby
8. +/-: to set the volume
for the lullabies and
for the talk-back
function
9. : power switch for
the baby unit
10.
1 built-in speaker
12.
wall bracket
13.
a push-button to register
(re-register) the camera
on the parent unit (use a
straightened paperclip to
press this little button)
14.
DISPLA
During use, the following icons can appear in the display
connection indicator:
: good connection between baby unit and parent unit
or : reasonable or poor connection
: connection interrupted
illuminates when the SCAN function is enabled
(only applicable when using multiple baby units)
illuminates when the infrared LEDs of the camera
are switched on (these turn on automatically when
it’s getting dark near the camera)
illuminates when the zoom mode is enabled
illuminates when the alert tone of the temperature
alarm is enabled
illuminates when the volume level is set to 0
(sound off)
visual sound indication:
: little or no sound in the baby room
: soft to moderate sound in the baby room
: loud sound in the baby room
battery indication:
: battery is full
: battery is nearly empty
: battery is charging
illuminates when there’s no battery installed;
the parent unit is now fully powered by the adaptor
TO PERSONALISE:
Y
DVM-143 according to your own preferences:
open the setup menu
/ search for the desired item
open the selected item
/ use the or utton to adjust or select a setting
conrmyourchoice
return to the camera image display
The following settings are available:
Language
to set the display language
LCD
to set the display brightness (level 1 – level 5) or
to switch the DIM mode on/off (to dim the display
automatically when no camera buttons are pressed
for 10 minutes, to save energy)
Lullaby
use this option to select one of the lullabies or sounds
or select ‘Play all’
sounds one after the other
Pair/Unpair CAM
select this option to add or remove additional
cameras, please refer to the below chapter ‘Multi-
camera’
Rename
use this option to assign a personal name to the
camera; you can choose the standard name ‘CAM’
choose one of the 6 pre-programmed names
Sensitivity
Here you can set how loud the baby must be crying
before the sound and image (see the next item) will
be activated through the parent unit:
Level 1: low sensitivity
before the baby monitor switches on
Level 2: moderate sensitivity
Level 3: average sensitivity
Level 4: high sensitivity
on as soon as the baby starts to cry softly
Level 5: VOX switched off, the baby monitor will
continuously transmit the images and sounds from
the baby
Sound-activated Screen
When this function is set to ‘On’
sleeping, not just the sound but also the display
will turn off.
display and sound will be turned on again. Use the
‘Sensitivity’
activation level).
When this function is set to ‘Off’, the screen will
remain active continuously
T
This option concerns the temperature display in the
screen of the parent unit and the optional alert tone.
At [Minimum] and [Maximum], you can enter the
upper and lower limit for showing a warning in the
display when these limits are exceeded.
Y
an alert tone must sound in addition to this warning.
At [Format], you can determine whether the
temperature must be displayed in degrees Celsius or
degrees Fahrenheit.
Alert T
Here you can set whether an alert tone must sound
when the battery starts to run empty [Low Battery
T
with the baby unit [No Link
baby units detects sound in SPLIT mode [Sound alert
in split-view]
MUL
INTRODUCTION:
Y
on the DVM-143 parent unit. Separate cameras are available
via the service department of
(Netherlands), 03 238 5666 (Belgium) or via internet
www
Fixed camera: DVM-1431
Pan/tilt camera: DVM-2001
REGISTERING ADDITIONAL CAMERAS:
First remove the new camera from its packaging, then
connect the supplied power adaptor
socket and slide the ON/OFF switch of the camera to the
‘ON’
Keep a straightened paperclip handy; you’ll need it in a moment
to press the little push-button in the bottom of the camera.
Now take the parent unit to pair the new camera
open the setup menu
/ select the option ‘Pair/Unpair CAM’
open this item
/ select ‘Pair CAM’
confirm your choice
/ select an available camera number
confirm the instruction
Now take the straightened paperclip
and use it to press the small button
in the bottom of the camera. Keep
this button depressed for several
seconds until the power indicator on
theadditionalcamerastartsashing
rapidly
After several seconds the image of
the new camera will appear in the display of the parent unit.
The additional camera is now registered and is ready for use.
OPERA
Upon switching on the parent unit, the image of only one
camera will be shown. Repeatedly press the i button on top of
the parent unit for the following:
• the images of the next paired camera will be displayed
while in the upper left corner the camera number is
indicated)
• the images of all paired cameras are displayed
simultaneously (‘split-view’)
• the images are automatically displayed one after the other
(‘scan mode’)
When using ‘split-view’:
- The sound is disabled, there’
-
notiedofthisintheupperpartofthescreen.Y
include an alert tone, for this please see the item ‘Alert tone’
in the chapter ‘T
- The menu for changing settings is not accessible.
Ifyou’dliketochangeasetting,rstreturntothedisplayofa
single image and then adjust the setting.
- In split-view you can use the , , and buttons to select
the desired image (yellow frame around that image) and
the press the button to display the selected image on full
screen, including sound.
back to ‘Split-view’.
When using the ‘Scan mode’:
- In scan mode the‘ ’
next to it the camera number of which images are shown.
- Every 7 seconds the next camera image will be shown on
full screen.
LOG OUT
Follow the steps below to deregister faulty cameras or
cameras no longer in use:
open the setup menu
/ select the option ‘Pair/Unpair CAM’
open this item
/ select ‘Pair CAM’
conrmyourchoice
/ select the camera you’d like to unpair
conrmtheinstruction
now press the and buttonsinordertoconrmthe
unpairing process.
FUNCTION O
Parent unit:
1. antenna flip it upward for optimum range
2. indicator: remains lit while the parent unit if
connected with the baby unit
flashes when the connection with the baby
unit is interrupted
indicator: remain
and the battery pack is being charged or
maintained
flashes when the battery pack is nearly
empty and must be charged
switched off when the adaptor is
disconnected and the battery pack’s
remaining capacity is still sufficient
indicator: illuminates when the speaker volume is
set to 0 (no sound)
indicator: illuminates when the talk-back function is
activated
3. built-in microphone
4. button: press and hold for 2 seconds to switch the
parent unit on or off
5. button press and hold to talk back to the baby
6. button press to zoom in (to get the display
somewhat closer); now use the , ,
and buttons to move the image to the
left, to the right, down or up
7. button: various functions, please see this user
manual
8. button: various functions, please see this user
manual
9. button: press and hold to turn of
briefly press to view the image of the next
camera (functional only when multiple
cameras are registered)
button: briefly press to play the next lullaby
button: to start or stop playback of the lullabies
DISPLA
• Brieypressandhold the button to switch off the
display (the sound will remain).
• Brieypressarandombuttonontheparentunittoswitch
the display back on.
This function works separate from the function for having
the display and sound turn off automatically when the
baby is sleeping. For this, please see the item ‘Sound-
activated Screen‘ further in this user manual.
LULLABIES:
• Brieypressthe button on the baby unit or parent unit
to start playback of the lullabies.
• During playback, press the button (baby unit) or
button
(parent unit) to select the next lullaby; you can choose from
5 lullabies and 4 nature sounds; the selected song will be
played repeatedly
• After 10 minutes, playback of the lullabies will stop
automatically button to
stop playback beforehand.
• Y
unit to adjust the volume.
• See the item ‘Lullaby’
all songs and sounds automatically one after the other
Remark: when pressing the button on the baby unit while
the volume on the parent unit is enabled, pressing this button
can be heard through the speaker of the parent unit. This is
not a defect, but happens because the microphone of the
baby unit is located next to this button.
AUTOMA
• The baby unit is provided with built-in 6 infra-red LEDs;
these LEDs will switch on automatically when the baby
room turns dark and will switch of again when it becomes
light. The LEDs can illuminate objects up to a distance
of approximately 2 meters. When it’s dark, that is when
the night vision LEDs are switched on, the images on the
parent unit will be displayed in black and white.
Attention: infra-red light cannot be perceived by the
human eye; that means you cannot tell whether the
infra-red LEDs are switched on with the naked eye.
TEMPERA
The upper middle part of the display shows the temperature
of the space in which the baby unit is placed.
Refer to the next chapter to assign a minimum or maximum
limit to this temperature display with an alarm.
Please keep in mind that the temperature is only indicative
and you must consider a possible deviation of +/- 2 degrees.
OPERA
TO SWITCH ON/OFF:
Parent unit:
• Brieypressandholdthe button to switch on the parent
unit.
• Brieypressandholdthe button again to switch off the
parent unit.
Baby unit:
• Slide the switch at the right side upward to switch on the
baby unit.
• Slide this switch downward to switch off the baby unit.
VOLUME:
Parent unit
• Repeatedly press the + button to increase the reception
volume and repeatedly press the – button to decrease the
reception volume.
• Y
• During setup, the display will show the current level.
• The light at the symbol will illuminate when you set the
volume to 0 while the appears in the display
• Upon reaching the minimum or maximum level, a double
beep tone will indicate that the sound cannot be any louder
or softer
Baby unit
• On the baby unit, use the + and – buttons to increase
or decrease the playback volume of the lullabies or the
volume of the talk-back volume.
• Y
• Upon reaching the minimum or maximum level, a double
beep tone will indicate that the sound cannot be any louder
or softer
TO T
• Press the button to talk back to the baby unit (press and
hold this button while talking). The indicator remains lit
while using the talk-back function.
• Y
adjust the volume.
• Attention: when the volume on the parent unit is set to 0
(off) and you press the button, the volume of the parent
unit will be automatically returned to level 1 allowing you to
hear the reaction of the baby
ZOOM: (GETTING THE IMAGE CLOSER)
• Brieypressthe button to zoom in.
• Use the , , and buttons to move the image to the
left, to the right, down or up.
• Brieypress the button again to zoom out.
SPECIFICA
Range: up to 50 meters indoors
up to 300 meters outdoors
Parent unit power: 3.7V Lithium Polymer battery
model BL198555/BT298555
5VDC 1000mA
Baby unit power: 6VDC 1000mA power adapter (incl.),
model: S006MV0600100.
Frequency: 2.4GHz, digital frequency hopping
(FHSS), 24 channels, auto hopping
Display: 4.3” TFT
WQVGA
Recharging time parent unit battery: ~ 6 hours*
Life-span parent unit battery: 6~7 hours*
T
Accuracy: ± 2°C (at 25°C)
*: the times mentioned above are references only and
depend on the usage, condition and quality of the batteries.
The
other provisions as described in the European Directive
1999/5/EC.
The declaration of conformity is available on the website
www
Use of this equipment is allowed in all countries of the EU. In
France, Italy
TIPS & REMARKS
INTERFERENCE-FREE:
• This baby display monitor is digitally coded. This means
you will never receive signals from other devices, nor can
the signal from your baby unit(s) be received by e.g. your
neighbors.
• In case the baby unit(s) or parent unit is placed in
orintheclosevicinityofelectromagneticelds,the
signal (images or sound) can be slightly affected. If this
happens, try a different location for the baby unit(s)
or parent unit or move, if possible, the source of the
interference.
EA
• Eavesdropping/wiretapping of the signals from this baby
video monitor is nearly impossible. Not only must one be
within range of the baby video monitor
some very costly equipment.
MAINTENANCE:
• Only clean the baby monitor with a moist cloth; never
use chemical cleaners. Before any cleaning, you must
disconnect the adapters.
RANGE:
• The baby display monitor has a range of up to 300
metersinanopeneldandupto50metersindoors;this
range depends on local circumstances.
DELA
• The baby unit transmits the images and sound to the
parent unit in digital blocks. The parent unit converts
these signals back to a recognizable image and a
comprehensible sound. Therefore, there is a small delay
between the moment of movement and making sounds
and the display and sounds of the parent unit.
• Besides that, the sounds and images on the parent unit
are not exactly simultaneous.
DVM-143
USER’S MANUAL
INTRODUCTION
The
system, suitable for private use indoors.
Y
the baby monitor switch on
A
Before you start using the set, please remove any
protective foil from the parent unit and baby unit.
INST
Parent unit:
Slide off the rear casing from
the parent unit
Install the rechargeable battery
pack according to the picture
on the right
Slide the rear casing back onto
the parent unit
Finally
parent unit and insert the adaptor into a 230V wall socket.
3
8
7
6
5
4
2
1
9
10
1
12
13
14
>1m
10. to increase the volume
1 – button: to decrease the volume
12. button:
to open the menu and to confirm selections
13. button: various functions, please see this user
manual
14. button: various functions, please see this user
manual
15. support
16.
17.
15
17
16
1
2
3
6
5
4
7
1
10
9
8
12
13
14
v1.0
