PRAELUDIUM III - PRAELUDIUM IV/E - User's Manual
Function Effects
AHLBORN Classical Organs
English Page 46
REVERB Selection and adjustment of reverberation effects
1
Entering this control it is possible to select the following two functions:
Reverb Selection
a
The organist may deactivate completely (Rev. OFF) or recall one of the four reverberation configurations pre-
viously memorized in the organ (Preset).
Reverb Editing
b
For every Preset it is possible to select:
Type Type of digital reverberation in relation to the typical architectonic structures where
the pipe organ is installed (Recital Room - Concert Hall - Church).
Level Exit level of the reverberation effect on the amplification of the instrument (from a
maximum of 0 dB to a minimum of -60 dB);
Time Setting of decay time of the reverberation effect (from a minimum of 0 to a maximum
of 127);
Delay Setting of timing of the first reflection between the
principal sound and the reverberation
sound
(from a minimum of 0 to a maximum of 127).
3D EFFECT (Adjustment to room size for simulated effect)
2
This effect permits a different spatial dimension of the sound of the instrument on the basis of tri-dimensional
simulations of the room where the organ is installed
VALUE RANGE From 0 (complete exclusion of the effect) To 10 (maximum room size)
REMINDER
This effect operates only on the internal amplification of the instrument or when headphones are used.